Setting Up AppLock

MX7 Tecton devices are shipped to boot in Administration mode. In this mode, the user has full access to the device and no password is needed. After the administrator completes the process below, the MX7 Tecton switches to end-user mode and restricts access to only the specified application(s).

1.Tap Start > Settings > Control Panel > Administration icon.

2.Assign application(s) on the Application tab screen.

3.Assign a password on the Security tab screen.

4.Select a view level on the Status tab screen, if desired.

5.Tap OK.

6.Press the hotkey (Ctrl + Shift + A) sequence to launch AppLock and lock the configured application(s).

7.The device is now in end-user mode.