Honeywell Q7751A Power Supply, Status Information, Mounting Options, Dimensions HxWxD

Q7751A ROUTER

Power Supply

The Q7751A Router requires 2 VA at an operating voltage of 16 to 30 Vdc or Vac. There is a power ON LED located on the front panel.

Status Information

Two service LEDs (channel 1 and channel 2) light to provide service request information for each segment.

The Router Activity LED lights when transferring from one channel to another.

Front panel has the Service Request button for broadcasting the Neuron ID on the network.

Mounting Options

The type 2 base plate mounts to either a U.S. 4 in. square, 2 in. deep (10.16 cm x 5.08 cm) electrical box, U.S. double gang electrical box or an IP-65 (NEMA 4) enclosure.

Dimensions (HxWxD)

3-15/16 x 3-15/16 x 1-3/4 in. (100.0 x 100.0 x 44.5 mm).

Environmental Ratings:

Operating and shipping temperature -40 to +185°F (-40 to +85°C).

Relative Humidity

-10 to 95% at 122°F (50°C).

Approval Bodies

U.L. LP Router 146747, Volume 2, Section 1.

LONWORKS® and Neuron® are registered trademarks of Echelon® Corporation.

Home and Building Control	Home and Building Control	Honeywell Asia Pacific Inc.
Honeywell Inc.	Honeywell Limited-Honeywell Limitee	Room 3213-3225
Honeywell Plaza	155 Gordon Baker Road	Sun Hung Kai Centre
P.O. Box 524	North York, Ontario	No. 30 Harbour Road
Minneapolis, MN 55408-0524	M2H 3N7	Wanchai
		Hong Kong
Honeywell Latin American Region	Honeywell Europe S.A.
480 Sawgrass Corporate Parkway	3 Avenue du Bourget
Suite 200	1140 Brussels
Sunrise, FL 33325	Belgium

74-2952—1 J.D. Rev. 6-99

Printed in U.S.A. on recycled
paper containing at least 10%
post-consumer paper fibers.	www.honeywell.com