1.2 Preliminary Checks, Continued
Series and model number data, continued
ATTENTION
Earlier Release ST3000 Transmitters
Communicating with the ST3000 Transmitter
For a complete breakdown of the table selections in your model number, please refer to the appropriate Specification and Model Selection Guide that is provided as a separate document.
Previous models of the ST 3000 transmitter with designations of Series 100, Series 100e, Series 600, and Series 900 have been supplied at various times since the ST 3000 was introduced in 1983. While all these transmitters are functionally alike, there are differences in housing and electronics design. This Installation Guide only applies for Release 300, Series 100 transmitters with software version 3.0 or greater and Release 300, Series 900 transmitters with software version b.0 or greater.
Release 300 transmitters can be identified by the “R300” designation on the nameplate.
If you have a Series 100e or a Series 900
Communication with your ST 3000 Smart Transmitter can be accomplished by using any of the following interfaces:
•Honeywell’s
•Smartline Configuration Toolkit (SCT 3000) that runs on a variety of Personal Computer (PC) platforms.
•Global Universal Station (GUS), if the transmitter is digital integrated with Honeywell’s TPS system.
Continued on next page
2/05 | ST 3000 Release 300 Installation Guide | 3 |