1.2 Preliminary Checks, Continued
Communicating with the ST3000 Transmitter, continued
Using the SFC:
If you ordered an SFC along with your transmitter, locate it and follow the instructions supplied with the SFC Model STS103 to prepare it for operation. Otherwise, be sure you have a fully charged SFC Model STS103 on hand to check the operation of your transmitter.
NOTE: SFC model STS103 with software version 5.0 or greater is fully compatible with all Series 100 and 900, Release 300, ST 3000 transmitters and smart meters. The SFC will operate with transmitters that have older software versions, but functions will be limited to those applicable for the transmitter software.
If your SFC is a Model STS102 instead, you must refer to the ST 3000 Smart Field Communicator for Series 3000 Transmitters Operating Guide
Using the SCT:
The SCT 3000 Smartline Configuration Toolkit runs on a variety of PC platforms using
NOTE: SCT 3000 software Release 3.12.2 or greater is compatible with all Series 100 and 900, Release 300, ST 3000 transmitters. Please contact your Honeywell representative for more information.
Using reference data | The ST 3000 Smart Transmitter Release 300 and SFC Smart Field |
| Communicator Model STS 103 User’s Manual, |
| separately to a person designated on the order. The User’s Manual |
| contains complete configuration, operation, calibration, service, and |
| replacement parts information for the transmitter, so you may want to |
| have it on hand for reference. It also includes the same installation data |
| contained in this installation guide to minimize cross reference. But, the |
| optional bench check function and reference dimension drawings list are |
| included in this guide only. |
| Appendix A Smart Meter Reference contains configuration and |
| operating information for using the the ST 3000 when it is equipped with |
| the smart meter option (option SM). |
|
|
4 | ST 3000 Release 300 Installation Guide | 2/05 |