Honeywell ST 3000 manual 62

A.2	Smart Meter Display
Display description		Figure A-1 shows a smart meter display with all its indicators and
		segments lit for reference.
		Table A-1 shows a smart meter with the pushbuttons highlighted and a
		brief description of each pushbutton. The pushbuttons are used for
		setting up the smart meter display and making zero and span
		adjustments.
Figure A-1	Smart Meter Display with All Indicators Lit.
		17-Segment Bargraph
		(0 to 100%)

VAR

SEL.

SPAN

Digital Readout (-19990 to +19990)

UPPER

VALUE

0		% 100
1			UNITS
		o	oC
-	8 8. 80 FLOW
		F
		%	SET

						ZERO	OUTPUT MODE	ANALOG	In H O	LOWER
							CHECK STATUS		2	VALUE	Engineering Unit
							FAULT - LAST		GPH mmHg
							KNOWN VALUE	K GPM PSI A			Indicators
		Status Indicators								K	Multiplier -
										Indicates digital readout
										is multiplied by 1,000
Table A-1		Smart Meter Pushbutton Description
	Smart Meter Pushbuttons						Pushbutton				Function
							VAR SEL.		Not functional when installed with
									ST 3000 transmitters.
VAR						UPPER	SPAN		Selects Span range setting (URV).
SEL.						VALUE	ZERO		Selects Zero range setting (LRV).
SPAN						UNITS	UPPER VALUE		Selects Upper Range Value setting
	-		.		oF oC				(URV).
					%	SET	UNITS SET		Selects engineering units for meter
					FLOW
	18 8 80
	OUTPUT MODE			ANALOG	In H2O	LOWER			display.
ZERO CHECK STATUS
	FAULT - LAST			GPH mmHg VALUE			LOWER VALUE		Selects Lower Range Value (LRV).
	KNOWN VALUE			K GPM PSI A
							￿		Decrease pushbutton
								￿	Increase pushbutton

52 ST 3000 Release 300 Installation Guide 2/05