Honeywell ST 3000 manual 81

A.5 Configuring Smart Meter Using Pushbuttons, Continued

Setting Upper Display

Values, continued

Table A-8 Setting Upper Display Value for Smart Meter Display, continued

Step Action Meter Display

8Press UPPER VALUE button to lock-in

second digit and activate next active digit.

	Readout now displays next active digit which	SEL.									VALUE
	will be zero unless upper value was set	VAR								UPPER
		0	%						100
	before.
			0 990							UNITS
										S E T
							ANALOG				LOWER
								K		VALUE
9	Press Increase ￿ button to select the next	Next digit value setting is set to 9.
	available digit value or Decrease ￿ button to
	select the previous digit value.
	Repeat this action until desired value is on	VAR							UPPER
	display – use 9 for example purposes.	SEL.							VALUE
		0							100
			%
			9 990						UNITS
									S E T
10	Press UPPER VALUE button to lock-in third					ANALOG			LOWER
	digit and activate next active digit.							K	VALUE
	Readout now displays next active digit which	Press and hold to
	will be BLANK unless upper value was set to								Press and hold to
		scroll backward
	1 before.	through values			0				scroll forward
									through values
			1
			2
			3
			4
			5
			6
			7
			8
				9
11	Press Increase ￿ button to set digit to 1 or	“1” digit value setting is set to 1.
	Decrease ￿ button to set it to BLANK.
		VAR							UPPER
		SEL.							VALUE
		0							100
			%
		19990							UNITS
									S E T
					ANALOG				LOWER
							K		VALUE
		Press to set "1"
									Press to set "1"
		digit as BLANK
									digit as 1
									Continued on next page

2/05 ST 3000 Release 300 Installation Guide 71