Honeywell ST 3000 manual 80

A.5 Configuring Smart Meter Using Pushbuttons, Continued

Setting Upper Display

Values, continued

Table A-8 Setting Upper Display Value for Smart Meter Display, continued

Step	Action		Meter Display
5	Press Increase ￿ button to select the next	First digit value setting is set to 9.
	available digit value or Decrease ￿ button to
	select the previous digit value.
	Repeat this action until desired value is on	VAR						UPPER
	display – use 9 for example purposes.
		SEL.						VALUE
		0					100
			%
			90					UNITS
								S E T
					ANALOG			LOWER
						K		VALUE
		Press and hold to
								Press and hold to
		scroll backward
					0			scroll forward
		through values						through values
			1
			2
			3
			4
			5
			6
			7
			8
				9

6Press UPPER VALUE button to lock-in first digit and activate next active digit.

	Readout now displays next active digit which
	will be zero unless upper value was set	VAR					UPPER
	before.	SEL.					VALUE
		0				100
			%
			090				UNITS
7	Press Increase ￿ button to select the next						S E T
	available digit value or Decrease ￿ button to			ANALOG			LOWER
	select the previous digit value.				K		VALUE

Repeat this action until desired value is on display.

Continued on next page

70 ST 3000 Release 300 Installation Guide 2/05