Housing Specifications (in mm)
Aluminium Direct Head Mount Housing
Suitable for general purpose or Intrinsically Safe applications. Dimensions shown in Fig. 1. Housing entry length = 41 mm Material : LM24 Aluminium die casting. Sensor entry : 1/2”NPT
Cable / conduit entry : 1/2”NPT or M20x1.5.
Weight : 0.3kg (0.7 lb)
Paint cover : beige polyester/ epoxy hybrid.
Enclosure classification : IP65
Order as STT250 Table II selection A _ _.
| 1/2" NPT or M20 |
33 | 40 |
| |
| 2 x M3 |
2 x M4 |
|
| 41 |
| 1/2" NPT |
|
|
Figure 1
Plastic Direct Head Mount Housing
Suitable for lightweight installation in salt air environments and for general purpose or Intrinsically Safe installations.
Maximum temperature = 70° C (158° F) Dimensions shown in Fig. 2.
Housing entry length = 26,5 mm Material : ABS
Sensor entry : 1/2”BSP (equivalent to 1/2”NPT)
Cable/ conduit entry : M20x1.5
Colour : light beige
Weight : 0.1kg (0.2 lb)
Enclosure classification : IP67
Order as STT250 Table II selection P _ _.
A |
|
| 85 |
33 |
|
57 | 1/2" NPT or M20 |
2 x M4 |
|
| 26.5 |
| 1/2" NPT |
A |
|
|
Figure 2
Cast Iron Direct Head Mount Housing
Suitable for
Dimensions shown in Fig. 3. Housing entry length = 41 mm Material : Cast Iron
Sensor entry : 1/2”NPT
Cable/ conduit entry : M20x1.5
paint cover : light beige
Weight : 2.5kg (5.5 lb)
Enclosure classification : IP68 Conforms to the applicable requirements of NEMA 7 and 9.
Order as STT250 Table II selection B _ _.
| ( | 104) |
|
2 x M4 |
|
|
|
33 | 111 | 1/2" NPT | or M20 |
2 x M4 | |||
41 |
|
|
|
|
| 1/2" NPT |
|
|
|
Figure 3
2 |