T8600D, T8601D AND T8602D CHRONOTHERM
®
IV DELUXE PROGRAMMABLE THERMOSTATS
68-0164—1 14

3. Press Copy.

M10326
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy
Copy
Mon

4. Press Day until the day to be copied to is displayed.

M10327
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day
Day
Heat/Cool
Settings
Daylight
Time Copy
Mon Wed

5. Press Copy.

NOTE: donE will be displayed for two seconds and

then the normal program display will be

shown.

M10328
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy
Copy

6. Repeat steps 2 through 5 for all the days desired.

7. Press Run Program.

Clearing Program Period

NOTE: The thermostat must be in the program mode to use

the clear feature. Go to step 2 if the thermostat is

already in the program mode.

1. Press Wake, Leave, Return or Sleep.

M10329
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave
Leave
Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy
Heat
AutoSystem FanMonAMLeaveSet ProgramStartTime Setting
Heat
M10330
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day
Day
Heat/Cool
Settings
Daylight
Time Copy
Heat
Auto
System Fan
AM
SatLeave
Set Program
StartTime Setting
Heat
M10331
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy
Heat
SatLeave
Set Program
StartTime Setting
Leave
M10332
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy
Heat
Wake
TemporarySetting

2. Press Day until the desired day is displayed.

3. Press Leave, Return or Sleep until the start time and

temperature setting are cleared (approximately 3

seconds).

NOTE: Wake cannot be cleared.

4. Repeat steps 2 and 3 for all the periods to be cleared.

5. Press Run Program.

Setting Temporary Temperatures

Changing Temperature Setting Until the Next

Program Period

Press increase ▲ or decrease ▼ key until the desired

temperature setpoint is displayed.

NOTE: If ▼ or ▲ appear under the temperature display, it

means that both the heating and cooling setpoints

are being adjusted. Tapping the key will change both

the heat and cool setpoints by one degree. Press i

after the desired setpoint is reached to check the

setpoints.

NOTE: The temporary temperature setting is displayed for

approximately 3 seconds. The setting is canceled

when the next period starts or when Run Program is

pressed.

Changing Temperature Setting Indefinitely

1. Press Hold Temp.

M10333
Time Set Program
System Fan
Run
Program
Hold Temp
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy
Heat
Setting

2. Press increase ▲ or decrease ▼ key to change the

setting, if desired.

M10334
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy
Heat
Setting

3. Press Heat/Cool Settings to change between heat and

cool settings.

M10335
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day Heat/Cool
Settings
Heat/Cool
Settings
Daylight
Time Copy
CoolSetting

4. Press increase ▲ or decrease ▼ key to adjust

temperature settings.

M10336
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy
CoolSetting