30 will flash, meaning that if selected, the alarm will sound 30 minutes earlier than the Weekday or Single alarm.

Select the desired Ice Warning Alarm interval in 15 minutes increments between 15 and 90 minutes, using UP (▲) or DOWN (▼)buttons

Press ALARM ON/OFF button to confirm and exit from the alarm setting mode.

ACTIVATING THE ALARM

Press ALARM ON/OFF button to enter into the desired alarm mode.

Press UP (▲) to activate or DOWN (▼) to deactivate desired alarm. When alarms are activated, the corresponding icons W, S or PRE-ALwill be displayed.

SNOOZE

When the time alarm sounds, press the SNOOZE/LIGHT button to temporarily stop it. After the SNOOZE/LIGHT is depressed, the time alarm sound will resume in four minutes.

If the alarm is not disabled after that, it will sound for two more minutes and then will stop by itself.

BACKLIGHT

The backlight feature is enabled only after the time is set.

To activate the backlight press the SNOOZE/LIGHT button once, and both – clock and weather station displays - will light up for five seconds.

PRECAUTIONS

This product is engineered to give you years of satisfactory service if handled carefully. Here are a few precautions:

Do not immerse the units in water.

Do not clean the units with abrasive or corrosive materials. They may scratch the plastic parts and corrode the electronic circuits.

Do not subject the product to excessive force, shock, dust, temperature, or humidity, which may result in malfunctions, shorter lifespan, damaged batteries, and damaged parts.

Do not tamper with the units internal components. Doing so will invalidate the warranty and may cause damage. These units contain no user-serviceable parts.

Use only fresh batteries. Do not mix new and old batteries.

Read the user's manual thoroughly before operating the units.

17

17

18

Page 9
Image 9
Honeywell TE219ELW user manual Snooze, Backlight, Precautions, Activating the Alarm