TG509, TG510, TG511, TG512 VERSAGUARD™ UNIVERSAL THERMOSTAT GUARDS
68-0104—4 8

Mount Thermostat Guard With Wallplate

CAUTION
Disconnect power supply to prevent electrical shock or
equipment damage.

Wall Mounting Front-wired Subbase (Fig. 10)

쐃Place the thermostat subbase (or wallplate) on the
wallplate template and mark the mounting holes.
쐇Locate the mounting holes on the guard wallplate using
the template as a guide.
쐋Drill the required 5/32 in. mounting holes in the guard
wallplate.
NOTE: If the mounting hole pattern on the guard
wallplate does not match the pattern on the
thermostat subbase or wallplate, drill
additional mounting holes in the guard
wallplate.
쐏Mount the thermostat subbase (or wallplate) and the
guard wallplate to the wall using the 1-1/4 in. sheet
metal screws provided with the thermostat. The guard
wallplate must be placed between the thermostat
subbase (or wallplate) and the wall. See Fig. 10.
쐄Wire the thermostat subbase (or wallplate). Refer to the
installation instructions provided with the thermostat.
쐂Mount the thermostat on the subbase (or wallplate) and
place the thermostat cover on the thermostat.
쐆Mount the guard ring base over the thermostat,
subbase (wallplate) and guard wallplate.
쐊Attach the ring base using four no. 6 sheet metal
screws or four anchors and screws (provided).
쐎Mount the guard cover by placing the hinged edge of
the guard cover on the ring base and swinging it down
(horizontal mounting) or to the side (vertical mounting)
until the thermostat guard is in place against the ring
base. See Fig. 7.
쐅Lock the thermostat guard by turning the key (provided)
counterclockwise. See Fig. 8. The key can be removed
only in the locked position.
쐈Remove the paper backing and clear protective cover
from the included monogram and place the monogram
in the recessed area on the guard cover. See Fig. 9.
50 60 70 80
50 60 70 80
50 60 70 80
HEATCOOL
GUARD WALLPLATE
THERMOSTAT
M657B
SUBBASE
WALL
RING BASE
MOUNTING
HOLES (4)
MOUNTING SCREWS (4)
Fig. 10. Mount guard wallplate and ring base on thermostat with front-wired subbase or wallplate.