Honeywell TH114-A-240D, 8162 Power-up, Error Messages, Backlight, Temperature Setting, Warranty

tInstall the control module onto the base. u Apply power to heating system.

NOTE: Always keep the thermostat's vents clean and unobstructed.

qPower-up

As soon as the thermostat is powered, it undergoes a series of tests before displaying the actual temperature.

rError Messages

LO: The measured temperature is below the display range. Heating is activated.

HI: The measured temperature is above the display range.

sBacklight

The display illuminates for 5 seconds when the backlight button is

pressed. When either of the buttons is pressed, the display illu- minates for 10 seconds.

tTemperature Setting

The thermostat normally displays the actual temperature. To view the

setpoint, press one of the buttons once. The setpoint will appear

for 5 seconds. To change the setpoint, press one of the buttons until the desired temperature is displayed. To scroll the setpoint faster, do not release the button.

uTechnical Specifications

Power supply: 208/240 VAC, 50/60 Hz Maximum load:16 A (resistive only)

3328 W @ 208 VAC

3840 W @ 240 VAC Setpoint range: 40 °F - 86 °F (5 °C to 30 °C) Display range: 32 °F - 122 °F (0 °C - 50 °C)

Display resolution: 1 °F (0.5 °C)

Heating cycle length: 15 minutes

Storage: -4 °F to 120 °F (-20 °C to 50 °C)

Remote controller input (ECONO): requires a dry contact

Certifications: CSA/UL

;Warranty

Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and ser- vice, for a period of one (1) year from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell's option).

If the product is defective,

(i)return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased it, or

(ii)call Honeywell Customer Care at 1-800-468-1502. Customer Care will make the determination whether the product should be returned to the following address: Honeywell Return Goods, Dock 4 MN10-3860, 1885 Douglas Dr N, Golden Valley, MN 55422, or whether a replacement product can be sent to you.

This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Honeywell that the defect or malfunction was caused by damage which occurred while the prod- uct was in the possession of a consumer.

Honeywell's sole responsibility shall be to repair or replace the prod- uct within the terms stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WAR- RANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you.

THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEY- WELL MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR- POSE, IS HEREBY LIMITED TO THE ONE-YEAR DURATION OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

If you have any questions concerning this warranty, please write Hon- eywell Customer Relations, 1985 Douglas Dr, Golden Valley, MN 55422 or call 1-800-468-1502. In Canada, write Retail Products ON15-02H, Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V4Z9.

Customer Assistance

If you have any questions about the operation of your thermostat, please go to http://yourhome.honeywell.com, or call Honeywell Customer Care toll-free at 1-800-468-1502.

08162 / TH114-A-240D / TL7235	69-2022	1/11/06	2/2
Non-programmable Thermostat - Installation and User Guide