Honeywell TS03 Precautions, Troubleshooting, Specifications, Main Unit, Clock, Remote Sensor

PRECAUTIONS

This product is engineered to give you years of satisfactory service if handled carefully. Here are a few precautions:

•Do not immerse the units in water.

•Do not clean the units with abrasive or corrosive materials. They may scratch the plastic parts and corrode the electronic circuits.

•Do not subject the product to excessive force, shock, dust, temperature, or humidity, which may result in malfunctions, shorter lifespan, damaged batteries, and damaged parts.

•Do not tamper with the units internal components. Doing so will invalidate the warranty and may cause damage. These units contain no user-serviceable parts.

•Use only fresh batteries. Do not mix new and old batteries.

•Read the user's manual thoroughly before operating the units.

TROUBLESHOOTING

Check here before contacting customer service.

Issue	Symptom	Solution
Remote sensor	Cannot locate remote	Check batteries
	sensor	Check location
		Press and hold DOWN ( ▼)
		button on the main unit to search
		for the signal form the remote
		sensor
	Data does not match	Initiate manual sensor search
	data on the main unit	(Press and hold DOWN ( ▼)
		button on the main unit)

SPECIFICATIONS

Main Unit

Indoor Temperature

Proposed operating range: 23.0°F to 122.0°F (-5°C to +50°C)

Temperature resolution: 0.2°F (0.1°C) User-selectable (°F or °C) temperature display Maximum number of remote sensors: 1 (one included) RF range: Maximum 100 feet (30 meters)

Readings update interval: every 45 seconds

Low battery indicators – for remote sensor and main unit

Clock

Precise Quartz Time 12/24 hour time format

Crescendo 4 minutes alarm with 5 minutes snooze

Remote Sensor

Remote Temperature

Proposed operating range with alkaline batteries: -4°F to + 158°F (-20°C to + 70°C)

Proposed operating range with lithium batteries: -38.8°F to +158°F (-38.8°C to + 70°C) Temperature resolution: 0.1°C/0.2°F

RF Transmission Frequency: 433 MHz

Temperature transmission cycle: approximately 45 seconds Low battery indicator

Wall-mount of Table stand

Power

Main unit: 2 AA size (UM-3) 1.5V batteries (not included)

Remote Sensor: 2 AA size 1.5V batteries (not included)

Dimensions

Main unit: 3.02(L) x 5.16 (H) x 1.11(D) inches

Remote sensor: 2.37(L) x 4(H) x 1 (D) inch

15 15 16