Honeywell TS33F Product Overview, Features, A Led Indicator, B Battery Compartment, C Reset

PRODUCT OVERVIEW

FEATURES

• Remote temperature transmission to the main unit via 433 MHz signal

• Temperature and Humidity LCD display

• Case can be wall mounted using built-in hanger

• 100 feet (30 meters) transmission range without interference

• Selection of the temperature display in Celsius or Fahrenheit

• 3 available channels for temperature and humidity transmission

• Reset for all previous readings

• Low Battery Indication

	E
A	MADE IN CHINA	G
C	F
	D

B

THERMO – HYGRO SENSOR

ALED INDICATOR

•Flashes once when the remote sensor transmits a reading to the main unit.

•Flashes twice when battery power is low.

BBATTERY COMPARTMENT

•Holds two AA-size batteries.

CRESET

•Resets all readings.

DCHANNEL SWITCH

•Selects the desired channel.

EWALL-MOUNT RECESSED HOLE

•Keeps the remote sensor on the wall.

F°C/ °F SWITCH

•Selects the temperature display in Celsius or Fahrenheit. 4

GEXTERNAL REMOVABLE TEMPERATURE PROBE

• Measures the temperature in the pools, hot tubs and etc.

TS33F SENSOR IS COMPATIBLE WITH ALL HONEYWELL WIRELESS WEATHER STATIONS

BEFORE YOU BEGIN

•The remote sensor can be placed indoors or outdoors.

•We recommend using alkaline batteries for the remote sensor when temperatures are above 32°F (0°C). We recommend using AA lithium batteries when temperatures are below 32°F (0°C).

•Avoid using rechargeable batteries. (Rechargeable batteries cannot maintain correct power requirements).

•Insert batteries before first use, matching the polarity in the battery compartment.

•ALWAYS install batteries in the remote sensor before the main unit.

•Press RESET after each battery change with a paper clip or similar tool.

•During an initial setup, place the main unit as close as possible to the remote sensor.

•After reception is established (the remote temperature and humidity will appear on the main unit's display), position the remote sensor and the main unit within the effective transmission range of 100 feet (30 meters).

NOTE:

1.Avoid setting manually the time and date on the main unit before the remote temperature is displayed.

2.The effective operating range may be influenced by the surrounding building materials and how the receiver (main unit) and transmitter (remote sensor) are positioned.

3.Place the remote sensor so that it faces the main unit (receiver), minimizing obstructions such as doors, walls, and furniture.

4.Though the remote sensors are weather-resistant, they should be placed away from direct sunlight, rain or snow.

NOTE: When the temperature falls below freezing, the batteries in the outdoor remote sensors may have reduced voltage supply and a shorter effective range. We recommend using lithium batteries at temperature 32°F (0°C) and below.

5