Hoover 800 General operation

The Mode selector dial (A) turns the brush-

es on and off.

Your HOOVER FloorMate™ SpinScrub™ 800 Cleaner can be used to both vacuum dry debris

and wet clean non-carpeted floor surfaces such as vinyl, tile, marble and sealed wood. It is

not intended for use on carpet or rugs.

CAUTION: To prevent damage to wood floors, follow the flooring manufacturer’s clean-

ing recommendations.

If using cleaner on sealed wood floors, inspect floor surface for worn finish, bare wood or

separated joints. Do not use FloorMate™ SpinScrub™ Cleaner to wet clean sealed wood

floors if any of these conditions exist.

General operation

For dry debris pickup, turn the dial to the

DRY VAC position. In this position, the

brushes will not rotate and are raised off the

floor surface.

To wet clean with brushes turned ON, turn the

dial to the WASH position.

For wet pickup, turn the dial to the WET PICK-

UP position.

Refer to “How to clean” section for complete

cleaning instructions.

To move your cleaner from room to

room, put handle in upright posi-

tion, tilt cleaner back on rear wheels

and push forward.

Transporting 16

The cleaner may also be lifted using the car-

rying handle (A) on the front of the cleaner.

19 19