2-11 2-12 2-13

2-14

9
Cleaning tools Attach hose to cleaner Select proper toolAttach wand andtoolsTo clean tools
The tool set includes a hose, wand,
crevice tool, furniture nozzle and dusting
brush. Turn cleaner OFF before attaching or
removing hose.
With cleaner handle in upright position,
open hose door and insert hose connec-
tor until locked in position. Suction will
automatically be diverted to the hose
when cleaner is turned on.
To remove hose, press latch (E) on hose
connector and pull up.
Note: Hose must be removed from hose
door when cleaning carpet and rugs to
insure proper cleaning performance.
1. Dusting brush may be used for
carved furniture, table tops, books,
lamps, lighting fixtures, venetian blinds,
baseboards, shutters, and registers.
2. Furniture nozzle may be used for
upholstered furniture, draperies, tapes-
tries, mattresses, clothing, automobile
interiors, and carpeted stairs.
3. Crevice tool may be used in tight
spaces, corners and along edges in
such places as dresser drawers, uphol-
stered furniture, stairs, and baseboards.
4. Wand used to give extra length to
your hose. Use it with any of the above

12

3

4

E

The tools are attached to the hose or the
wand in the same manner.
Push tool firmly onto hose; twist tool
slightly to tighten or loosen connection.
Use cleaning tools with cleaner handle
in upright position.
To clean the hose, wipe off dirt with a
cloth dampened in a liquid detergent.
Rinse with a damp cloth. Cleaning tools
may be washed in warm water with a
detergent. Rinse and air dry before
using.
C A U T I O N: Agitator continues to rotate
while cleaner handle is in upright posi-
tion. Avoid tipping cleaner or setting it
on furniture, fringed area rugs, or car-
peted stairs during tool use.