PROGRAMME SELECTION AND SPECIAL FUNCTIONS
(Use in conjunction with programme guide)
IMPORTANT
The dishwasher has two very practical functions:
-the "recommended" programme (which is set in the factory and is ideal for
-the memory function which saves the last programme used, so that if you regularly use the same washing cycle, you do not have to
"ACTION PRO" button
This button allows you to modify the wash intensity, according to how dirty your dishes are, by modifying the wash time and temperature.
Press the button to increase the intensity of wash cycle (
indicator light) or to reduce the intensity of wash, this also allows you to decrease the wash length time (
indicator light).
The combination of the button with the 4 main wash programmes enables to have 8 additional wash cycles (achieving a total of 12 programmes of washing).
IMPORTANT
When the dishwasher is switched on, the setting last used will be indicated.
Programme settings
■Open the door and place the dirty dishes inside the appliance.
■Press the "ON/OFF" button 
.
The indicator light for the "recommended" programme or the indicator light for the last programme used will flash.
■To set another programme, press the "PROGRAMME SELECTION" button.
■If you wish, press the "ACTION PRO" button.
■If you wish to select an option, press the corresponding button (the indicator light will turn on).
The option buttons can be selected or deselected WHITIN one minute of the programme commencing.
■Press the "START" button (the selected programme indicator light will stop flashing and remain on.
■When the door is shut, after an audible signal has sounded, the programme will start automatically.
WITHIN one minute of the programme commencing, another programme can be selected, simply by pressing the "PROGRAMME SELECTION" button (it is also possible to change the "ACTION PRO" button setting ).
Programme interruption
Opening the door when a programme is running is not recommended especially during the main wash and final hot rinse phases. However, if the door is opened while a programme is running (for example, to add dishes) the machine stops automatically.
Close the door, without pressing any buttons. The cycle will start from where it left off.
IMPORTANT
A running program can be interrupted without opening the door by pressing the "ON/OFF" button. In this case, simply press the "ON/OFF" button again to restart the cycle from where it left off.
WARNING!
If you open the door during the drying cycle, an audible audio signal advises you that the drying cycle has not yet finished.
21
