Storage

Before storing:

Empty clean water tank and let air dry. Replace on deep cleaner.

Unused detergent can be stored in the detergent container.

Empty recovery tank, rinse tank and lid thoroughly with clean water and let air dry.

Allow brushes and underside of deep cleaner to air dry thoroughly before storing deep cleaner on a carpeted or wood surface.

Do not store deep cleaner with a full clean water tank in place.

Lubrication

The motor is equipped with bearings which contain sufficient lubrication for the life of the motor. The addition of lubricant could cause damage. Do not add lubricant to motor bearings.

Possible cause

Possible5. Ifsolutiyoun have a

problemRec very tank full/automatic

If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the check list below.

Problem: Machine won’t run

Possible cause

Possible solution

Not firmly plugged in

Plug unit in firmly

No voltage in wall receptacle

Check fuse or breaker

Blown fuse/tripped breaker

Replace fuse/reset breaker

Problem: Low solution pick-up

Possible cause

Possible solution

Recovery tank full/automatic shut off engaged

Remove and empty recovery tank

Blockage in tool on end of hose

Remove tool and clear blockage

Recovery tank lid not on correctly

Make sure lid is on securely

Water tank empty, but detergent remains

Fill water tank

Problem: Clean water won’t

dispense

Possible cause

Possible solution

Clean water tank not firmly in place

Make sure tank is securely locked in position

Clean water tank or detergent container empty

Refill container according to instruc- tions for surface being cleaned

Recovery tank lid not on correctly

Make sure lid is firmly in place

Problem: Detergent won’t

dispense

Possible cause

Possible solution

Valve cap clogged

Remove and clean valve cap (see fol- lowing instructions)

1. Remove clean water tank.

5-1

A

A

2.Turn valve cap (A) counterclockwise and remove.

Soak valve cap in warm water for at least 15 minutes. Wipe cap dry.

5-2

C

B

3.Align slots (B) on cap with tabs (C) in opening.

Turn cap clockwise to tighten.

Problem: Brushes won’t rotate during

floor cleaning

Possible cause

Possible solution

Dirty filter screen on bottom of unit

Clean screen as shown in Fig. 3-2

Setting selector on OFF

Move setting selector to ON

Service

To obtain approved HOOVER service and genuine HOOVER parts, locate the nearest Hoover Factory Service

Center or Authorized Hoover Warranty Service Dealer (Depot) by:

checking the Service section of The Hoover Company on-line at www.hoover.com OR

checking the list of Factory Service Centers provided with this cleaner

OR

checking the Yellow Pages under “Vacuum Cleaners - Household” OR

calling 1-800-944-9200for an automated referral of authorized service outlet locations (U.S. only).

Do not send your cleaner to The Hoover Company in North Canton for service, this will only result in delay.

If further assistance is needed, contact The Hoover Company Consumer Response Center, North Canton, Ohio 44720 Phone: 330-499-9499.

In Canada, contact Hoover Canada, Burlington, Ontario L7R 4A8, Phone: 1-800-263-6376.

Always identify your cleaner by the complete model number when request- ing information or ordering parts. (The model number appears on the bottom of the cleaner.)

16

Page 16
Image 16
Hoover Deep Cleaner with Auto Rinse SteamVacuum manual Possible cause, Not firmly plugged, No voltage in wall receptacle

Deep Cleaner with Auto Rinse SteamVacuum specifications

The Hoover Deep Cleaner with Auto Rinse SteamVac is a revolutionary cleaning appliance designed to tackle tough stains and provide an effortless cleaning experience. Combining advanced technology with user-friendly features, this carpet cleaner sets a new standard for home cleaning efficiency and effectiveness.

One of the standout features of the Hoover Deep Cleaner is its Auto Rinse technology. This innovative system automatically rinses the carpet after cleaning, removing any leftover cleaning solution and ensuring that carpets are left fresh without residue. This not only enhances the appearance of carpets but also contributes to a healthier indoor environment by minimizing the risk of mold or bacteria growth.

The SteamVac technology further enhances the cleaning process, utilizing hot steam to penetrate deep into carpet fibers and loosen dirt, grime, and allergens. This powerful steam cleaning capability helps to lift stubborn stains while reducing the need for harsh chemicals, making it a more environmentally friendly option for households. The combination of steam and powerful suction ensures that carpets dry quickly, minimizing downtime and allowing homeowners to return to their daily routines with minimal disruption.

In addition to its advanced cleaning capabilities, the Hoover Deep Cleaner is designed with user convenience in mind. It features a lightweight design, making it easy to maneuver around furniture and transport between rooms. The dual tank system separates clean water from dirty water, allowing users to easily see when it’s time to change the tank and ensuring that only clean water is used during the cleaning process.

Versatility is another key characteristic of the Hoover Deep Cleaner. It comes equipped with multiple cleaning modes, including settings for various carpet types and hard surfaces, ensuring that it can handle a wide range of cleaning challenges. The included upholstery and stair cleaning attachments further enhance its versatility, allowing users to clean furniture and other areas with ease.

With a powerful motor and durable construction, the Hoover Deep Cleaner with Auto Rinse SteamVac is built to last. Its combination of advanced technologies and user-friendly features makes it an essential tool for anyone looking to maintain clean, fresh carpets and surfaces in their home. Whether facing everyday messes or deep-seated stains, this deep cleaner is designed to provide exceptional results, making it a top choice for consumers seeking efficiency and performance in their cleaning appliances.