Hoover Dubl-Duty How to use, Cleaning tools, Picking up dry debris, Crevice tool A may be used

2. How to use

Remove the cleaner from wall bracket and depress ON/OFF switch to operate. Release switch to turn cleaner off and to conserve power between tasks.

Cleaning tools

(available with deluxe model)

The cleaning tools added to the multi- purpose nozzle make it easy to com- plete the following tasks:

2-1

A

B

Crevice tool: (A) may be used

for wet or dry pick-up in tight spaces, corners, or along edges of places such as dresser drawers, upholstered furni- ture, stairs and baseboards. Squeegee: (B) may be used on hard surfaces to pick up liquids and to assist in drying surface.

2-2

Attach either tool to cleaner by pushing tool firmly into nozzle. Remove tool by pulling straight out.

NOTE: Remove squeegee from nozzle before mounting cleaner in wall bracket.

2-3

2-4

2-5

C

Picking up dry debris

Use cleaner to remove dust and dirt from upholstered furniture, mattresses, clothing, automobile interiors and car- peted stairs, or for quick pick-up on car- pet, rugs and bare floors. Empty collec- tor cup before picking up liquid or wet debris.

Picking up liquids and wet debris

Use this cleaner to pick up liquids and wet debris or a combination of each. Hold the nozzle end down after wet pick-up to avoid any spillage.

The collector cup will hold approximately 8 oz. of liquid. To check the liquid level, hold cleaner with nozzle down; when liq- uid is near end of tube (C), empty cup.

Cleaning spills

Your wet and dry cleaner can be very effective in cleaning up spills if the fol- lowing procedures are used:

ON CARPET

1.Immediately vacuum up as much of the spill as possible.

2.For oily spills work some low sudsing carpet shampoo into the area according to the directions on the container.

Vacuum up shampoo and spill residue, continue with procedure for water solu- ble spills.

For water soluble spills, dampen area using a spray bottle of cool clear water. Be careful not to saturate carpet.

3.Work water into nap of carpet.

4.Vacuum up water and spill residue.

5.Repeat procedure if necessary, but not more than four times to avoid satu- rating the carpet.

6.Cover the area with several layers of white paper towels or a terry cloth towel. Step on towels several times to blot car- pet.

7.Brush up nap of carpet.

ON UPHOLSTERY

1.Immediately vacuum up as much of the spill as possible.

2.Follow the furniture manufacturer’s instructions for spot cleaning the uphol- stery, using your cleaner whenever possi- ble.

NOTE: Do not attempt to pick up a sol- vent based product with this cleaner.

5