CONTROLS AND INDICATORS
Programme | Empty Water | Filter Care | Program | Start/Pause |
Selector | Indicator | Indicator | Display | Button |
Time Selection | Delay Start | Acrylic Synthetic | |
Button | Button | Button | Button |
Control Panel and Indicator Lights
Knob: You can turn it in both directions to choose the required programme.
Time Selection : To modify the drying timing of required programme; it works only with certain
programmes. |
|
|
|
Delay start | : To delay the start of the drying cycle and to dry your laundry when electricity costs | ||
less (please see dedicated section). |
|
| |
Delicate fabrics (symbol): when pulled, this indicator | turns off and this new one | turns on; |
with this special function, the drying temperature is lower to better protect your delicate clothes.
: Select the | |
moving at regular phases to refresh the laundry. | |
Cool down | : This indicator turns on during the final cool phase of the cycle. |
Start/Pause | : To start the programme required or to pause the cycle. |
Automatic programmes: Depending on desired programme, specific indicators turn on (please see “programme list”); ECO indicatorturns on when you select a low consumption programme.
Filter care | : When on, please clean the filters. | |
Full water tank | : When on, please empty the water tank. |
SELECTING THE PROGRAMME
This machine has a special Sensor Dry to help you choose your preferred programme simply by selecting the level of dryness wanted.
For small loads and
If the Sensor does not detect any item, this Dryer will work for only 10 minutes before starting the Cool down phase.
If the load is too big or too wet, this Dryer will automatically work for 3 hours and then start the Cool down phase.
At the end of each programme, there is always the Cool Down phase: it is a
EN 8