The Control Panel
Door Lock
Indicator
Programme | Spin Speed |
Selector | Selector |
Digital | Wash Time |
Display | Selector |
Sensitive | Temperature Start/Pause | |
Care | Selector | Button |
Stain | Delay | Easy |
Blaster | Start | Iron |
Turning the Machine On
Turning the Programme Selector to your chosen programme will turn the machine on. The Programme Selector must be returned to the OFF position between each wash cycle in order to reset the controls.
Start Pause Button
START
After selecting the programme and the required options press the Start Pause button once to start the wash cycle. There will be a short time delay to the start of the programme while the machine sets the wash parameters for the selected programme and options. The Door Locked and KG Mode indicator lights will also illuminate a few seconds after pressing the Start Pause button.
In some programs in the initial phase of the cycle there are planned spin sequences to ensure optimal wash results.
PAUSE
The programme may be paused at any time during the wash cycle by holding down the Start Pause button for about two seconds. The door locked indicator light will remain illuminated for approximately 2 minutes. The door can be opened when this indicator goes out. To restart the programme, press the Start Pause button once again.
Cancelling and Changing the Programme
To cancel the programme the Programme Selector should be rotated to the OFF position. Select a new programme and start as detailed above.
16
