“SENSITIVE CARE” button | I |
By pressing this button you can activate a special new wash cycle in the Cotton and Mixed Fabrics programs, thanks to the new Sensor System. This option treats with care the fibres of garments and the delicate skin of those who wear them.
The load is washed in a much larger quantity of water and this, together with the new combined action of the drum rotation cycles, where water is filled and emptied, will give you garments which have been cleaned and rinsed to perfection. The amount of water in the wash is increased so that the detergent dissolves perfectly, ensuring an efficient cleaning action. The amount of water is also increased during the rinse procedure so as to remove all traces of detergent from the fibres. This function has been specifically designed for people with delicate and sensitive skin, for whom even a very small amount of detergent can cause irritation or allergy.
You are advised to also use this function for children’s clothing and for delicate fabrics in general, or when washing garments made of towelling, where the fibres tend to absorb a greater quantity of detergent. To ensure the best performance for your wash, this function is always activated on the Delicates and Woollens/Hand Wash programs.
“DRYING SELECTION” button | L |
With the programme selector not in the OFF position, press the button to select the required drying programme; an indicator will light to display the drying result selected each time you press the button.
To cancel the selection before the start of a drying programme, press the button repeatedly until the indicators go out or return the programme selector to the OFF position.
To cancel the cycle during the drying phase, hold the button down for 2 seconds until the cooling indicator lights up; given the high temperature inside the drum, we recommend that you allow the dryer to complete the cool down period before returning the programme selector to the OFF position and removing the laundry.
Drying programme indicators | M |
The indicators display the type of programme and/or drying time:
Automatic Programmes: By selecting one of these 3 automatic programmes, the washer- dryer will calculate the time needed for drying and the residual dampness required, according to the load and drying type selected.
After pressing the START button, one of the indicators will light to display the drying time remaining.
= Extra dry drying programme (recommended for towels, bathrobes and bulky loads)
= Cupboard dry drying programme
= Iron dry drying programme
10
USEFUL TIPS:
The 30 minute drying programme is recommended for small loads (less than 1 kg) or slightly damp loads.
Your
Timed programmes:
120 minutes – 90 minutes – 60 minutes – 30 minutes: Dual function indicators:
If one of the 3 automatic drying programmes is selected, the indicators display the drying time remaining
They may be used to select timed drying programmes.
Cool down phase 
:
Switched on during the final cool down period, in the last 10 minutes of each drying phase.
“COLD WASH” button | N |
By pressing this button it is possible to transform every programme into a cold washing one, without modifying other characteristics (water level, times, rythmes, etc...).
Curtains, small carpets, man made delicate fabrics, non coulor fast garments can be safely washed thanks to this new device.
“EASY IRON” button | O |
The Easy Iron function (Not available on COTTON programmes) minimizes creases as much as possible with a uniquely designed
MIXED FABRICS - the water is gradually cooled throughout the final two rinses with no spinning and then a delicate spin assures the maximum relaxation of the fabrics.
DELICATE FABRICS – after the final two rinses with no spinning the machine stops in the final rinse stage and the option indicators blink. The load is held in the water in the drum, thus reducing creasing and enabling easier ironing.
WOLLENS/SILK – after the final rinse the load is held in the water in the drum, thus reducing creasing and enabling easier ironing and the option indicators blink.
To complete the cycle press the Easy Iron button and the machine will pump out the water and complete the cycle.
If you do not want to spin the clothes and activate drain only:
-Turn the programme selector to the "OFF" position;
-Select programme drain only 
;
-Switch on the appliance again by pressing the "Start/Pause" button. 11