DESCRIPTION OF THE CONTROL PANEL
F G H I
PROGRAMME SELECTION AND SPECIAL FUNCTIONS
(Use in conjunction with programme guide)
IMPORTANT
The dishwasher has two very practical functions:
-the "recommended" programme (which is set in the factory and is ideal for
-the memory function which saves the last programme used, so that if you regularly use the same washing cycle, you do not have to
Programme interruption
Opening the door when a programme is running is not recommended especially during the main wash and final hot rinse phases. However, if the door is opened while a programme is running (for example, to add dishes) the machine stops automatically. Close the door, without pressing any buttons. The cycle will start from where it left off.
WARNING!
If you open the door during the drying cycle, an audible audio signal advises you that the drying cycle has not yet finished.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| E D C |
|
|
|
| B |
| A | |||||||||||
A "ON/OFF" button |
| F |
| "PROGRAMME STATUS" lights/ | ||||||||||||||||||||
B PROGRAMME DESCRIPTION |
| "DELAY START" time lights | ||||||||||||||||||||||
|
|
|
|
|
| |||||||||||||||||||
C "PROGRAMME" buttons |
| G "OPTION SELECTION" light | ||||||||||||||||||||||
| H "PROGRAMME SELECTION" lights | |||||||||||||||||||||||
D "1/2 AUTO" option button |
| |||||||||||||||||||||||
| I |
| "SALT EMPTY" light | |||||||||||||||||||||
E "DELAY START" button |
|
| ||||||||||||||||||||||
|
|
|
|
|
|
|
|
| ||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| DIMENSIONS: |
|
|
|
|
|
|
|
|
| ||||||||||||||
| Height |
|
|
| 82÷90 |
|
|
| ||||||||||||||||
| cm |
|
|
| ||||||||||||||||||||
| Depth | cm |
|
| 55 |
|
|
| ||||||||||||||||
| Width | cm |
|
| 59,8 |
|
|
| ||||||||||||||||
| Depth with door open | cm |
|
| 117 |
|
|
| ||||||||||||||||
| TECHNICAL DATA: |
|
|
|
|
|
|
|
|
| ||||||||||||||
|
|
|
|
|
|
|
|
|
| |||||||||||||||
| EN 50242 place load |
|
|
|
|
|
| 15 |
|
| ||||||||||||||
| Capacity with pans and dishes |
|
|
|
|
|
| 9 persons | ||||||||||||||||
| Water supply pressure |
|
|
|
|
|
| Min. 0,08 - Max 0,8 MPa | ||||||||||||||||
| Fuse |
|
|
|
|
|
| (see rating plate) | ||||||||||||||||
| Power input |
|
|
|
|
|
| (see rating plate) | ||||||||||||||||
| Supply voltage |
|
|
|
|
|
| (see rating plate) | ||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Programme settings
■Open the door and place the dirty dishes inside the appliance.
■Press the "ON/OFF" button 
.
The indicator light for the "recommended" programme or the indicator light for the last programme used will flash.
■If you wish to select an option, press the option button (the corresponding indicator light will light up).
The option button can be selected or deselected WITHIN one minute of the programme commencing.
■Choose a programme by pressing the corresponding button.
■Close the door (after an audible signal has sounded, the programme will start automatically).
WITHIN one minute of the programme commencing, another programme can be selected, simply by pressing the corresponding button.
IMPORTANT
To select the "COLD RINSE" programme, simultaneously press the "RAPID" programme button and "1/2 AUTO" option button.
Changing a running programme
Proceed as follows to change or cancel a running program:
■Open the door.
■Hold down the current programme button (with the indicator light on) for at least 5 seconds. The programme indicator lights will flash and some audible signals will sound.
■The running programme will be cancelled and the indicator light for the “recommended” programme will start to flash.
■At this point a new programme can be set.
IMPORTANT
To cancel the "COLD RINSE" programme, simultaneously hold down the "RAPID" programme button and "1/2 AUTO" option button.
WARNING!
Before starting a new programme, you should check that there is still detergent in the dispenser.
If necessary, top up the dispenser.
20 | 21 |