DESCRIPTION OF THE CONTROL PANEL
H
G
|
| A BC D E F GI |
|
|
| L | M | |
A DIGITAL DISPLAY |
|
|
| |||||
|
| G "START" programme button | ||||||
B "PROGRAMME SELECTION" button | H "SALT EMPTY" light |
|
| |||||
C | "DELAY START" button |
|
| I | "RINSE AID EMPTY" light | |||
D | "ALL in 1" option button |
|
| L | Programme guide |
|
| |
E | "POWER JET” option button |
|
| M "ON/OFF" button |
|
| ||
F | "1/2" option button |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| DIMENSIONS: |
|
|
|
|
|
|
|
| Height |
|
|
| 82 ÷ 88,5 |
|
|
|
| cm |
|
|
| |||
|
| Depth | cm |
|
| 55 |
|
|
|
| Width | cm |
|
| 59,8 |
|
|
|
| Depth with door open | cm |
|
| 117 |
|
|
|
| TECHNICAL DATA: |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| EN 50242 place load |
|
|
| 15 |
|
|
|
| Capacity with pans and dishes |
|
|
| 9 persons |
|
|
|
| Water supply pressure |
|
|
| Min. 0,08 - Max 0,8 MPa |
| |
|
| Fuse |
|
|
| (see rating plate) |
|
|
|
| Power input |
|
|
| (see rating plate) |
|
|
|
| Supply voltage |
|
|
| (see rating plate) |
|
|
|
|
|
|
|
|
|
|
|
PROGRAMME SELECTION AND SPECIAL FUNCTIONS
(Use in conjunction with programme guide)
IMPORTANT
The dishwasher has two very practical functions:
-the "recommended" programme (which is ideal for full load daily use) for quick and accurate selection;
-the "Auto’ Memory", function saves any programme used at least 3 times consecutively, so that if you regularly use the same washing cycle you do not have to continually set the programme thereby saving time and effort.
Program settings
■Open the door and place dirty dishes inside the appliance.
■Press the "ON/OFF" button 
.
■After pressing the "ON/OFF" button, the symbol of the programme which is factory set at "recommended” or the symbol for the "Auto’ Memory" programme will appear on the display.
■To select an option, press the corresponding button (the indicator light will turn on).
Option buttons must be pressed BEFORE starting the programme for them to be accepted.
■To set another programme, press the "PROGRAMME SELECTION" button ("P").
■When the required programme is shown in the display, press the "START" button. The length of the program will be shown on the display alternating hours with minutes [I.e.: 1 h (1 hour) / 25 (25 minutes)].
■Close the door (after an audible signal has sounded, the programme will start automatically).
“AUTOMATIC” programmes
The dishwasher is equipped with a dirt sensor, able to analyse water murkiness during all "AUTOMATIC" programme phases (see programme list); thanks to this sensor the washing cycle parameters are automatically adapted to the real quantity of dirt on dishes. Thus excellent washing results are guaranteed while optimising water and energy consumption.
"IMPULSE" programmes
The “IMPULSE” programmes use an impluse washing technology, which reduces consumption, noise and increases performances.
IMPORTANT
The “intermittent” working of the washing pump MUST NOT BE considered a malfunction, it is a characteristic of the impulse washing so must be considered a normal function of the programme.
Programme interruption
Opening the door when a programme is running is not recommended especially during the main wash and final hot rinse phases. However, if the door is opened while a programme is running (for example, to add dishes) the machine stops automatically and the display will flash the remaining time before the end of the cycle. Close the door, without pressing any buttons. The cycle will start from where it left off.
WARNING!
If you open the door during the drying cycle, an audible audio signal advises you that the drying cycle has not yet finished.
20 | 21 |