Changing a running programme
Proceed as follows to change or cancel a running programme:
■Open the door.
■Hold the "START" button down for at least 5 seconds (the running programme will be cancelled).
■At this point a new program can be set.
WARNING!
Before starting a new programme, you should check that there is still detergent in the dispenser.
If necessary, top up the dispenser.
If there is any break in the power supply while the dishwasher is operating, a special memory stores the selected programme and, when the power is restored, it continues where it left off.
Programme end
A 5 second buzzer will sound (if not muted) 3 times at 30 second intervals to signal that the programme has ended. Dishes can now be removed and the dishwasher turned off by pressing the "ON/OFF" button or dishes can be loaded for a new cycle.
Option buttons
IMPORTANT
All options MUST be turned on or off, BEFORE pressing "START" button.
"ALL in 1" button
This option optimises the use of "ALL in 1" ("3 in 1"/"4 in 1"/"5 in 1", ecc.) combined detergents.
By pressing this button, the selected washing programme is modified to get best performance from combined detergents (furthermore, the salt aid shortage light is
WARNING!
Once selected, this option keeps being on (light on) also for next washing cycles and it can be
IMPORTANT
When this option is selected, the "RAPID" cycle is 10 minutes longer.
"POWER JET" button
The "POWER JET" option always guarantees the best results by more effectively dealing with heavier soiling. By using this option, the strength of the selected cycle will be increased, adding one rinse and increasing the temperature and water pressure in the washing phase where foreseen.
This option is recommended for very dirty dishes or when dirty dishes may not have been
IMPORTANT
With this option selected the “IMPULSE” wash is turned off.
"1/2" button
In response to your everyday washing requirement in addition to the normal wash functions this dishwasher is equipped with the “1/2” function. This function enables the uses to wash a reduced number of dishes yet retaining the freedom of loading them both on the top and bottom basket.
When this function is activated the dishwasher will automatically reduce the water and energy consumption and the wash time. When selecting the “1/2” ensure a reduced amount of detergent is used.
22
"DELAY START" button
Dishwasher start time can be set with this button, delaying start from 1 to 23 hours.
Proceed as follows to set a delayed start:
■Press the "DELAY START" button ("00" will appear on the display).
■Press the button again to increase the delay in hours (each time the button is pressed the delay is increased by 1 hour to a maximum of 23).
■To start the countdown press the "START" button. At the end of the countdown, the programme will automatically start.
If you wish to see which programme has been selected, press the "PROGRAMME SELECTION" button.
Proceed as follows to cancel a delayed start:
■Hold the "START" button down for at least 5 seconds.
■At this point, a new programme and option buttons must be set to start a new programme as indicated in the
"PROGRAMME SETTINGS" section.
Alarm mute for the PROGRAMME END
The alarm for the programme end may be muted as follows:
■With the dishwasher off, hold down the "PROGRAMME SELECTION" button for few seconds while simultaneously pushing the "ON/OFF" button.
■"b1” will appear on the display to indicate that the alarm is on.
■Press the "PROGRAMME SELECTION" button again "b0" will appear on the display to indicate that the alarm is off).
■Wait for the alarm to sound to indicate that the settings were saved.
■To turn the alarm on again, follow the same procedure ("b1" will appear on the display to indicate that the buzzer is on).
WARNING!
To ensure the correct operation of the
23