Transporting or storing the
appliance for long periods when
appliance is not in use
If the appliance is being transported or is out of
use for long periods in unheated places, all
remaining water must be completely removed
from all hoses.
Ensure mains power plug is disconnected, then
unclip the discharge hose and lower it into a
basin on the floor until all the water has emptied
out.
When transporting the appliance refit the transit
bracket, central screw and side screws.
27
It is unlikely that water will be visible in the drum! This
is due to the latest technology that achieves the same
standard of washing and rinsing but with far less water
consumption.
Note:
The use of environmentally-friendly, phosphate-free detergents (check detergent
information on pack) can have the following effects:
– waste water from rinsing may be cloudier because of the presence of a white
powder (zeolites) held in suspension, without the rinse performance being
adversely affected;
– presence of white powder on laundry after washing, which is not absorbed by
the fabric and does not alter the colour of the fabric.
– The presence of foam in the final rinsing water is not necessarily an indication
of poor rinsing.
– Carrying out more rinse cycles does not serve any purpose in such cases.
Cleaning the door glass
Regularly clean the door glass with a damp cloth.A build up of soiling and
residues from the water may result in water leaking from the door.
Do not use abrasive cleaners as they can scratch the surface.
40000518.qxd 07/11/2003 12:13 Page 27