3.To view the setting temperature, (anytime) press the corresponding 
or 
button, the setting temperature will temporarily flash in the LCD display for 5 seconds.
Flashing LCD = Setting Temperature Steady LCD = Cabinet Temperature
4.This unit has the option to display temperature in either Celsius or Fahrenheit. To change the setting, press the button marks C/F
5.You can turn the interior lights on or off by pressing the button marked
symbol. The interior lights are LED lights and low energy bulbs (only 0.25W for each one) and low heat. However they should not be left on for long periods of time, only whilst you are looking inside of the wine cooler.
6.Your wine cooler is designed with an
Shelves
Shelving is wooden. To accommodate different size bottles, they
can be moved up or drown by sliding them out of the tracks. The shelves are designed to accommodate the maximum amount of bottles.
Wine Rack
There is an additional wine rack at bottom section of the unit where you can store up to 6 wine bottles. This rack is removable for cleaning purpose.
NOTE:
When you use the wine cooler for the first time or restart the wine cooler after it has been turned off for long time , there could be a few degrees variance between the temperature you select and the one indicated on the LCD readout. This is normal and it is due to the length of the activat- ion time . Once the wine cooler is running for a few hours everything will be back to normal.
Also, there is a 2 to 3 C variance between the top and bottom shelves of each compartment. Therefore, If you have set the wine cellar for red wine only and the temperature reads 16 C and you want to place a mix of white and red wines, you should place the wine bottles on the bottom shelves and the red wines on the top shelves.
6
