Hoover How to use, Storing hose & tools, For Plus models, How to reattach tool cover, F F E

1 - 10

D

Slide rack down into place. Insert screw at (D) and tighten with a Phillips screw- driver.

1 - 11

Storing hose & tools

Store hose on rack by first positioning hose in front section of holder.

1 - 12

F

F

E

Continue wrapping hose under lower hook (E). Snap hose end fully into hold- er (F).

The hose end must be pushed com- pletely down into holder (F) to ensure maximum suction when cleaning floors.

1-13

Position tool in holder at base of cleaner and snap it into place as shown at arrow.

1 - 14

For Plus models

To store stair/upholstery nozzle, open tool door, place nozzle in bracket and fit it securely into position. To remove, reverse this procedure.

1 - 15

How to reattach tool cover

The tool cover is designed with a break- away feature which allows it to snap free if it is pushed open too far.

To reattach, align hinges of cover with slots on sides of tool storage area.

Push cover down to secure in place.

	2. How to use					The assembled deep cleaner will look like the drawing.
	Deep cleaner description					1.	Hand grip	14.	Recovery tank: holds dirty
						2.	Solution trigger: press to		solution.
	2-1	1
							release clean solution.	15. Hood
						3.	Cord clip: place cord in clip	16.	Brush speed selector:
2							to keep it out of the way		slide selector to set brush
							when using cleaner		speed on HI, LO, or OFF.
		4		6		4.	Hose	17.	Brush Indicator: spins
						5.	Hose holder: wrap hose		when brushes are rotating.
			4		7		around holder and hooks (6)	18.	Nozzle.
							for storage.	19.	Cleaning mode indicator:
		8				6.	Hose hooks	20.	choose either floor or tools
		9				7.	Cord hooks: wrap cord		ON/OFF pedal
							around hooks for storage.	21.	Handle release pedal: step
		10	5				The top hook can be rotated		on pedal to lower handle to
		11					right or left for quick and		operating (floor) position;
		12					easy cord release	22.	Stair/upholstery nozzle OR
			3			8.	Stair/upholstery nozzle*		Utility nozzle*
		13				9.	Carrying handle
						10. Clean solution tank handle		*Included with some models
		14		7		11. Clean solution tank cap/
		15					measuring cup	This deep cleaner is intended
				22		12. Clean solution tank: holds
							cleaning solution.	for household use. Operate
		16				13. Recovery tank handle:		deep cleaner only at voltage
		17					raise handle to unlock tank	specified on data plate on back
							for removal; lower handle for	of cleaner. Plug deep cleaner
19			21	20			ward to lock tank into posi-	Into a properly grounded
		18					tion.	outlet.
				6
									Continued ➜ 5