If you have a problem
The appliance was inspected thoroughly and was in good operating con- dition when it was shipped from the factory. If a minor problem occurs it usually can be solved quite easily when the cause is found. Therefore, this check list is provided for your convenience.
| Problem | Possible cause | Possible solution | |
| Unit won’t | 1. Not firmly plugged in. | 1. Plug unit in firmly. | |
run | 2. No voltage in wall plug. | 2. Check fuse or breaker. | ||
|
| 3. Blown fuse/tripped | 3. Replace fuse/reset | |
|
| breaker. | breaker. | |
|
|
|
|
|
| Unit won’t | 1. Filter bar clogged. | 1. Clean filter bar. | |
pick up |
|
|
| |
solution |
|
|
| |
|
|
|
|
|
| Extreme | 1. Defoaming cake needs | I. Replace defoamer cake. | |
sudsing of | replacing. |
|
| |
| used solu- |
|
|
|
tion |
|
|
| |
Shampoo- 1. Foam generator clogged. 1. Clean foam generator. er does
not dis- pense foam
Service
To obtain approved HOOVER service and genuine HOOVER parts, locate the nearest Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer (Depot) by:
•checking the Yellow Pages under “Vacuum Cleaners- Household” OR -
0 checking the list of Factory Service Centers provided with this cleaner OR -
•calling
Do not send your cleaner to The Hoover Company in North Canton for service, this will only result in delay.
If further assistance is needed, contact The Hoover Company Consumer Response Center, North Canton, Ohio 44720 Phone:
In Canada, contact Hoover Canada, Burlington, Ontario L7R 4A8, Phone:
Always identify your cleaner by the complete model number when request- ing information or ordering parts. (The model number appears on the bottom of the cleaner.)
19
