Hoover Shampoo- Polisher manual Assembly, How to use, The control button

Assembly

I. Remove bright plated (top) screw from back of tank housing.

2.Position handle as shown lining up holes. Push handle down firm- ly into place. Do not grip trigger or twist handle while installing.

Insert screw and tighten.

3.The tank fits into the opening in the front of the tank housing. Place bottom of tank into posi- tion; then push top of tank until it clicks into place.

How to use

The control button

The control button, located on the handle, has three positions: “OFF”, “SCRUB-POLISH-SHAMPOO”, “WET PICKUP.”-

-

1.The unit is off when the control button is moved back to the “OFF” position.

2.To scrub, polish or shampoo, move the control button to the right and then forward to the “SCRUB-POLISH- SHAMPOO” posi- tion.

3.For wet pickup, move the control button to the left and then forward to the

“WET PICKUP” position.

NOTE: Before changing from one position to the other, always return control button to the “OFF” position.

5