After using scrub tool

To clean scrub pad, pull it off module. Wash it in water with mild detergent. Rinse and let air dry.

Pad must be completely dry before reat- taching to module and storing on deep cleaner,

Replacement pads may also be pur- chased. Ask for HOOVER part no.

40309001.

To store scrub module, remove scrub module from tool in same manner as removing the brush module.

Align openings on back of module with tabs in storage area (H).

Push module into position.

I

After using tool

1, Follow steps a and b for “After clean- ing” on page 9.

2.Rinse tool and hose by filling sink with a small amount of water. Turn

deep cleaner ON and pickup the water with the tool.

3.Drain hose by turning deep cleaner ON and holding end of hose up for sev- eral seconds. Do not press trigger,

4.Disconnect deep cleaner from elec- trical outlet.

5.Drain solution tube (located inside hose) by pointing end of hose in sink and pressing trigger.

6.Proceed with steps c, d, and e, for “After cleaning” on page 9.

Read “Before you begin cleaning” Instructions on page 9.

1.Place handle in upright position.

Agitator brushes will not rotate while handle Is In upright position.

2.Fill clean solution tank with HOOVER Carpet/Upholstery Detergent according to instructions for Figs. 2-10 to 2-16.

3.Attach tool to end of hose.

4.Hose length may require that machine be placed at the top of the stairs to clean upper half of stairway and at bot- tom of stairs to clean lower half.

To prevent machine from falling, use extra caution when cleaning on stairs.

Do not place deep cleaner on stairs.

Do not point tools toward people or pets.

5.Dry hands and plug deep cleaner into a properly grounded outlet.

6.Turn deep cleaner ON. If necessary, refer to “Before using tool” section to remove air from the system.

12

7.Pre-spray the carpeted stair by hold- ing the tool (A) or (B) about one inch above the carpet and push it forward while pressing the trigger (equals one wet stroke).

6.Position tool against the riser and slightly press it into carpet pile. Press the trigger and pull the tool slowly over the carpet (second wet stroke). Release trigger at end of stroke.

T

9.Lift tool, and position it against riser. Pull tool slowly over carpet without pressing trigger (dry stroke).

It is best to alternate wet and dry strokes as described above. End with more dry strokes to aid in faster drying of carpet.

10.Overlap strokes by l/2 inch to help prevent streaking.

To avoid saturating carpet, do not use more than 4 wet strokes over any one area. Always end with dry strokes.

If additional cleaning is necessary, wait until the carpet is completely dry before using the tool again.

11.Empty recovery tank when the motor sound becomes higher pitched and there is a loss in suction (see “Automatic shut-off”, Fig. 2-6)

When finished cleaning, follow “After cleaning” instructions on page 9 and “After using tool” instructions on page 12.

Page 11 Page 13
Page 12
Image 12
Hoover SteamVac LS manual After using tool, After using scrub tool, 40309001
Page 11 Page 13

SteamVac" LS specifications

The Hoover SteamVac LS is a powerful carpet cleaning machine designed to ensure a thorough, deep clean of carpets and upholstery. Its advanced features and innovative technologies make it a popular choice for both homeowners and professional cleaners alike.

One of the most notable characteristics of the Hoover SteamVac LS is its unique SpinScrub brush system. This technology employs multiple rotating brushes that work in a circular motion to agitate and lift dirt and stains from carpet fibers effectively. The SpinScrub brushes are gentle enough to protect delicate fabrics while being robust enough to tackle stubborn dirt, making it versatile for various cleaning tasks.

The Hoover SteamVac LS is equipped with powerful suction capabilities, which help to extract water and cleaning solution from carpets efficiently. This feature not only speeds up the drying time but also ensures that the carpets are left clean and fresh. With its strong suction power, users can expect reduced residue and a significantly improved cleaning outcome.

Another standout feature of the SteamVac LS is its ability to deliver heated cleaning. The machine has an integrated heating system that helps to warm the water as it is used in conjunction with the cleaning solution. The heated solution enhances the cleaning process by breaking down tough stains and dirt, making it easier to remove them.

The Hoover SteamVac LS also boasts a user-friendly design, with a streamlined appearance that makes it easy to maneuver. The lightweight construction allows for effortless transport, while the long power cord ensures users can reach far areas without the need for constant outlet changes. Additionally, the large capacity tanks for clean and dirty water minimize interruptions during cleaning sessions, allowing for extended use before needing to refill or empty.

The machine includes multiple cleaning modes and tools, providing versatility for various surfaces. From carpets to upholstery and even hard floors, the Hoover SteamVac LS adapts to your cleaning needs. The ability to switch between these modes ensures effective cleaning across different areas of the home.

Moreover, maintenance is simplified with this model, as the detachable tanks can be easily removed for cleaning and refilling. The design allows users to keep the machine in optimal condition with minimal effort.

In conclusion, the Hoover SteamVac LS stands out in the market for its combination of advanced cleaning technologies, user-friendly design, and versatility. Whether tackling pet stains, high traffic areas, or routine cleanings, this carpet cleaner is equipped to handle a wide range of challenges, ensuring a cleaner and fresher home environment.
Top Page Image Contents