Reinsert bolt through small holes of handle and secure with nut. Tighten nut with screwdriver. Proceed to Section C.
2) Round handle
A. Put handle together
Remove cardboard from the end of handle sections. Remove bolt and nut from upper handle sec- tion.
Slide the two handle sections to- gether, making sure that both cord storage hooks are on the same side of handle. Insert bolt through small holes and secure with nut. Tighten nut with screw- driver.
If the nut and bolt will not assem- ble as shown in the illustration, the holes in the handle are not lined up correctly.
B. Attach handle to the cleaner
Unscrew nut and remove bolt and plate from handle bail.
Take assembled handle and place so that the socket holes in the bottom of the handle are directly in line with the electrical prongs. Position the handle so that the
Push down until handle is secure- ly in place. Insert bolt into small hole in front of handle.
6
