Carbon Filter : How to Clean
(Available on select models only).
Your Carbon filter is located under the HEPA Filter.
IMPORTANT 
DO NOT RINSE OR WASH the Carbon Filter.
Carbon Filter: What to Buy
When used and maintained properly, your Carbon filter should never need replacement. If desired, replacement filter is available. Ask for Hoover® Part No.902404001.
Cyclonic Filter Assembly: How to Clean
! CAUTION !
To reduce the risk of injury from moving parts, unplug vacuum before servicing.
Do not use vacuum without dirt cup or filters in place.
Remove dirt cup as described in Fig. 4.3.
4.9Twist filter assembly (A) counterclockwise. Remove assembly from dirt cup.
4.10Dirt and debris can be cleaned from the filter assembly with the Dusting/ Upholstery Tool.
4.11Place the filter assembly on the dirt cup, aligning (3) tabs (A) on filter with (3) slots on dirt cup
(B) and twist it clockwise to secure into position.
Replace dirt cup as described in Fig. 4.5.
4.9 |
A |
4.10 |
4.11 |
B |
A |
BRUSHROLL: How to Clean
! CAUTION !
To reduce the risk of injury from moving parts, unplug vacuum before servicing.
4.12Turn vacuum over so bottom side is facing up. Rotate red upper latch (A) counterclockwise.
4.13Slide red lower latch (B) to the unlock position.
4.14Pivot out bottom plate and remove any debris and/or hair from brushroll.
Reposition bottom plate, aligning tabs along front edge of nozzle guard with slots in nozzle. Rotate back into position. Slide red lower latch to Lock position, and rotate red upper latch clockwise.
4.12 | A |
|
4.13 |
B |
4.14 |
10
