HOSE: How to Clean
! CAUTION !
To reduce the risk of injury from moving parts, unplug vacuum before servicing.
4.15To remove Hose for tool use, press the Hose Release Button (A) and pull Hose end out.
Clear away debris or obstructions from Hose. Do not use sharp objects to clean out hose as they can cause damage. To lock back into place, push Hose into Hose Tube until you hear a click.
4.15 |
A |
Powered Hand Tool: How to Clean | ||
(Tool varies per model) | 4.16 A | |
! CAUTION | ||
! | ||
To reduce the risk of injury from moving parts, unplug vacuum before servicing.
4.16 Turn tool so bottom faces up. Rotate the latches (A) on either side of tool.
4.17Remove bottom plate (B).
4.18Remove any debris and/ or hair from brushroll.
Replace bottom plate by aligning tabs along front edge of tool. Rotate latches back into locked position.
4.17 B
4.18 |
Headlight: How to Replace
! WARNING !
To reduce the risk of electrical shock, unplug vacuum before cleaning or servicing.
Removing Lens
Press Handle Release Pedal and place Handle in low position.
4.19Using a Phillips screwdriver, remove (2) screws as shown and lift off lens.
Installing Bulb
4.20Pull old bulb straight out of socket. Push new bulb straight into socket until locked in place.
Excessive force is not required.
Twisting or turning bulb not required.
Replacing Lens
4.21 Reposition lens and secure with screws.
4.19 |
Headlight:
What to Buy
This vacuum uses a common automotive
lamp #906, 13 volt.
4.20 |
4.21 |
11
