OPERATION
Delay Start Function
The Delay Start Function allows the user to delay the start of the drying cycle by 1 to 24 hours.
When the function is first selected the display will show a delay of 1 hour, subsequent presses of the button will increase the delay with 1 hour steps.
To commence the programme press Start/Pause and the appliance will complete the drying cycle at the end of this time. The indicator light will flash to indicate that the start delay is in progress.
Cancelling and Resetting the Programme
To cancel a programme press the Start/Pause button for 3 seconds. In the TIME CONTROL display 0:00 Light will flash to indicate that it has been reset.
CLEANING AND ROUTINE MAINTENANCE
Cleaning the Dryer
●Clean the filter and empty the water container after every drying cycle.
●Regularly clean the condenser.
●After each period of use, wipe the inside of the drum and leave the door open for a while to allow circulation of air to dry it.
●Wipe the outside of the machine and the door with a soft cloth.
Technical Specifications
Drum capacity | 115 litres |
Maximum load | 8 kg |
Height | 85 cm |
Width | 60 cm |
Depth | 60 cm |
Energy Label Band | C |
IMPORTANT Always switch off and remove the plug from the electricity supply before cleaning this appliance.
● DO NOT use abrasive pads or cleaning | For electrical data refer to the rating label |
agents. | on the front of the dryer cabinet (with the door |
| open). |
●To prevent the door sticking or the build up of fluff periodically clean the inner door and gasket with a damp cloth.
WARNING! The Drum, door and load may be very hot.
EN 11
