CONTROLS AND INDICATORS
Programme | Filter Care | Program | Start/Pause |
Selector | Indicator | Display | Button |
Time Selection | Delay Start | Acrylic Synthetic | |
Button | Button | Button | Button |
Control Panel and Indicator Lights
Programme Selector – Select the required programme
Time Selection Button – Allows the user to change duration of the program selected by Programme Selector. It can be used only with the selection of: Mix&Dry, Shirts and Time Programs Delay Start Button – Allows the user to delay the start of the drying cycle (see details of Operation )
Acrylic Synthetic Button – Press to select the type of fabrics to dry Acrylic and Synthetics, when
pressed Acrylic Synthetics option is activated and the indicator 
lights up.
Anti- Crease Button – Allows the user to select a post drying
Memo Button – Allows user to record the program by pressing simultaneously the Anti- Crease and the Acrylic Synthetic buttons for 3 seconds, after 2 minutes duration of the chosen program/option
Filter Care indicator 
– lights when the filter needs cleaning
Program Display – Related indicator lights when a auto program has been selected.
Refresh 
– The indicator lights up when the program starts the cool down stage.
SELECTING THE PROGRAMME
The Sensor Dry machine gives many options for drying the laundry to suit all circumstances. The table on the next page lists the programmes and the function of each programme.
Note:
The sensor may not detect a small load of small articles. For small loads and separate items or
If the sensor does not detect the item the dryer will only operate for 10 minutes before going into cooldown.
If the load is too large or too wet to tumble dry the dryer will automatically go into cooldown after approximately 3 hours.
In these cases we advise to use a time cycles between 30 and 75minutes depending on the load size and dryness required, and select high or low heat depending upon the fabric type.
EN 8
