Floor surface selector
Carpet or rug cleaning
When using the power nozzle for carpet
and rug cleaning, push the floor surface
selector button toward “RUG” (D). This
setting provides the suction and agitator
action necessary to deep clean carpets.
The nozzle adjusts automatically to vari-
ous carpet pile heights.
Deluxe power nozzle Handle positions
The handle has two positions when used
with the power nozzle: upright and
operating.
To lower handle to operating position,
place your foot firmly on the power noz-
zle and pull handle back.
Check bag indicator The indicator will begin to show red as
bag fills with dirt. There are three condi-
tions that will cause the indicator to
become completely red:
1. The bag is full; change the bag.
2. Ve ry fine materials (such as powder)
have been picked up, clogging the bag
p o res; change the bag, even if it is not full.
3. There is a blockage in the nozzle, hose,
tools, or at the bag opening; remove the
b l o c k a g e .
On some models two switches are
used to turn the cleaner on for opera-
tion.
P ress remote control switch (C) on hand
grip to the “OFF” position before plugging
c o rd into electrical outlet.
Plug cord into an electrical outlet and
step on ON-OFF pedal. The POWER
ON light will glow, indicating that the
cleaner can then be controlled at the
hand grip. Press hand grip switch to
the ON position.
ON-OFF switches After assembling cleaner, plug cord into
electrical outlet. Turn cleaner on by
depressing ON-OFF pedal (A). To turn
cleaner off, depress pedal again.
Note: Pedal opposite ON-OFF pedal is
Cord Rewind Pedal (B).
5
2-2 2 - 3Polarized plug
To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other). This
plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to
install the proper outlet. Do not change
the plug in any way.A
C