Hoover Y Series manual Routine care for your Carpet Cleaner, Clean the nozzle, Clean the brushes

41		Routine care for your Carpet Cleaner
	A	Clean the nozzle
		Unplug carpet cleaner from electrical outlet.
		➤ Remove solution and recovery tanks to prevent possible leaks.
42		➤ Lift up on top of nozzle (A) and slide off cleaner (Fig. 41).
		➤ Wipe debris off nozzle and front of cleaner with a damp cloth.
	B	➤ Tilt cleaner back, raising front of cleaner off floor. Slide nozzle
		(B) up from bottom of cleaner (Fig. 42).
		➤ Press on upper portion of nozzle to snap in place.
		Clean the brushes
43		Unplug carpet cleaner from electrical outlet.
		➤ Remove solution and recovery tanks to prevent possible leaks.
		➤ Tilt cleaner back so handle rests on the floor.
		➤ Pull brush assembly firmly to remove (Fig. 43).
44		➤ Rinse brushes under running water.
	D	➤ Align posts (C) on brush assembly with slots (D) in cleaner
	F E	(Fig. 44).
		➤ Turn brushes slightly to align square post (E) with square hole
		(F) in cleaner (Fig. 44).
	C	➤ Press brush assembly firmly and snap in place.
		Clean the brush filter
		Unplug carpet cleaner from electrical outlet.
45		➤ Remove solution and recovery tanks to prevent possible
		leaks.
	G	➤ Tilt cleaner back so handle rests on the floor.
		➤ Squeeze filter frame (G) and pull it out until it stops (Fig. 45).
		➤ Wipe debris off filter.
12		➤ Slide filter back into place.