17
Stair/Upholstery nozzle
• Built-in brush
• Use on upholstery
Attach the hose
Unplug carpet cleaner from electrical outlet.
✓ Place handle in upright position. |
✓ The hose and tool caddy can be removed from the |
cleaner if you desire. |
✓ Remove hose from tool caddy. |
✓ Open hose door (A) on back of carpet cleaner (Fig. 13). |
✓ Align hose connector with hose and solution ports (C) |
(Fig. 14). |
Push hose into port and lock in place. |
13
A
14 | A | C |
|
B
✓ |
✓ To remove hose: Squeeze latches (D) on top and bottom |
of hose. Remove hose from port (Fig. 15). |
✓ Close hose door (A) tightly (inset). |
Select tool
16
SpinScrub™ hand tool
• Rotating brushes
• Use on carpet to clean
15
D
A 
spots, small areas or stairs
Attach tool
Unplug carpet cleaner from electrical outlet.
✓ Slide tool onto hose. Snap tool over tab (E) on hose (Fig 18). To remove tool: Push forward and up on latch (F) (Fig. 19).
✓ Slide tool off hose.
18 | F | 19 |
|
|
E 
Continued ➜ | 7 |
