Description of controls
Fig. 1
N B C I L M
R
O
D E F G H
|
| A |
|
| |
|
|
|
Door handle |
| A |
"Door Security" indicator light |
| B |
"Start/Pause" button |
| C |
"Stain Blaster" button |
| D |
"Sensitive Care" button |
| E |
"Delay Start" button |
| F |
Wash temperature button |
| G |
"Fast Iron" button |
| H |
"Spin Speed" button |
| I |
Digital display |
| L |
Wash time button |
| M |
Programme selector with “OFF” position |
| N |
Buttons indicator light |
| O |
Detergent drawer |
| R |
|
|
|
Door handle | A |
|
Press the
“DOOR SECURITY” indicator light | B |
The “Door Security” indicator light is illuminated when the door is fully closed and the machine is ON. When "Start/Pause" is pressed on the machine with the door closed the indicator will flash momentarily and then illuminate.
If the door is not closed the indicator will continue to flash.
A special safety device prevents the door from being opened immediately after the end of the cycle. Wait for 2 minutes after the wash cycle has finished and the “Door Security” light has gone out before opening the door. At the end of the cycle turn the programme selector to "OFF" .
“START/PAUSE” button | C |
Press to start the selected cycle .
NOTE: When the "Start/Pause" button has been pressed, the appliance can take few seconds before it starts working.
Changing the settings after the programmes has started (PAUSE)
Press and hold the “START/PAUSE” button for about 2 seconds, the flashing lights on the options buttons and time remaining indicator will show that the machine has been paused, adjust as required and press the “START/PAUSE” button again to cancel the flashing lights. If you wish to add or remove items during washing, wait 2 minutes until the safety device unlocks the door.
When you have carried out the manoeuvre, close the door, press "Start/Pause" button and the appliance will continue working where it left off.
CANCELLING THE PROGRAMME
To cancel the programme, set the selector to the OFF position.
Select a different programme.
6 | 7 |