INTRODUCTION

PRECAUTIONS

 

PROPER USAGE

 

 

 

 

 

IMPORTANT

 

Your treadmill is capable of reaching high speeds. Always start off using a slower speed and adjust the speed in

 

 

small increments to reach a higher speed level. Never leave the treadmill unattended while it is running. When

 

 

not in use, remove the safety key, turn the on/off switch to off and unplug the power cord. Make sure to follow

 

 

the MAINTENANCE schedule located on page 34 in this manual. Keep your body and head facing forward. Do not

 

 

attempt to turn around or look backwards while the treadmill is running. Stop your workout immediately if you

 

 

 

feel pain, faint, dizzy or are short of breath.

ASSEMBLY

 

 

 

 

 

 

 

Do not operate the treadmill if the power cord or plug is damaged.

 

 

WARNING

 

 

 

If the treadmill appears to not be working properly, do not use the treadmill.

 

 

 

 

 

 

 

 

 

 

TENSIONING­THE RUNNING BELT

The running belt has been properly adjusted at the factory before it was shipped. At times the belt can move off-center during shipment.

CAUTION: Running belt should NOT be moving during tensioning. Over-tightening the running belt can cause excessive wear on the treadmill as well as its components. Never over-tighten the belt.

If you can feel a slipping sensation when running on the treadmill, the running belt must be tightened. In most cases, the belt has stretched from use, causing the belt to slip. This is a normal and common adjustment. To eliminate this slipping, turn the treadmill off

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

CONDITIONING TROUBLESHOOTING GUIDELINES & MAINTENANCE

MOVING

Your treadmill has a pair of transport wheels built into the frame. To move, make sure the treadmill is folded and securely latched. Then firmly grasp the handlebars, tilt the treadmill back and roll. NOTE: Do not attempt to disassemble and transport treadmill.

FOLDING

Firmly grasp the back end of the treadmill. Carefully lift the end of the treadmill deck into the upright position until the foot lock latch engages and securely locks the deck into position. Make sure the deck is securely latched before letting go. To unfold, firmly grasp the back end of the treadmill. Gently press down on the foot lock latch with your foot until the lock latch disengages. Carefully lower the deck to the ground.

and tension both the rear roller bolts using the supplied allen wrench, turning them 1/4 TURN to the right as shown. Turn the treadmill on and check for slipping. Repeat if necessary, but NEVER TURN the roller bolts more than 1/4 turn at a time. Belt is properly tensioned when the slipping sensation is gone.

Belt is too far to the right side

CENTERING THE RUNNING BELT

The running belt has been properly adjusted at the factory before it was shipped. At times the belt can move off-center during shipment. Before operating the treadmill, make sure the belt is centered and remains centered to maintain smooth operation.

CAUTION: Do not run belt faster than 1/2 mph while centering. Keep fingers, hair and clothing away from belt at all times.

If the running belt is too far to the right side:

With the treadmill running at 1/2 mph, turn the right adjustment bolt clockwise 1/4 turn at a time (using the supplied Allen wrench). Check the belt alignment. Allow belt to run a full cycle to gauge if more adjustment is needed. Repeat if necessary, until the belt remains centered during use.

If the running belt is too far to the left side:

With the treadmill running at 1/2 mph, turn the right adjustment bolt counter-clockwise 1/4 turn at a time

BEFORE YOU BEGIN

TREADMILL OPERATION

TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES

LIMITED WARRANTY

14

WARNING

Our Treadmills are heavy, use care and additional help if necessary when moving. Do not attempt to move or transport treadmill unless it is in the upright, folded position with the lock latch secured. Failure to follow these instructions could result in injury.

(using the supplied Allen wrench). Check the belt alignment. Allow belt to run a full cycle to gauge if more adjustment is needed. Repeat if necessary, until the belt remains centered during use.

15

LIMITED WARRANTY

T81_Treadmill_Rev.2.0.indd 14-15

5/29/07 8:43:09 AM

Page 8
Image 8
Horizon Fitness T81 manual TENSIONING­THE Running Belt, Moving, Folding, Centering the Running Belt, Proper Usage

T81 specifications

The Horizon Fitness T81 is a versatile and highly regarded treadmill that has garnered attention for its blend of performance, comfort, and usability. It is primarily designed for home fitness enthusiasts who seek a robust machine that can accommodate various workout styles, whether it's casual walking or intense running.

One of the standout features of the Horizon Fitness T81 is its powerful motor. Equipped with a 2.5-CHP motor, it offers impressive speeds ranging from 0.5 to 10 mph. This ensures that whether you're warming up, jogging, or running at full throttle, the treadmill can maintain stability and performance without overheating, making it ideal for users of all fitness levels.

The T81 also boasts a cushioned running surface, which is crucial for reducing impact on the joints. The multi-layered deck construction is designed to absorb shock and provide a smoother running experience. This feature is particularly beneficial for those who may have joint issues or are concerned about the long-term effects of running on harder surfaces.

For convenience, the treadmill includes a user-friendly console that features an easy-to-read LCD display. This screen provides essential workout information, including time, distance, speed, calories burned, and heart rate. The T81 also comes with built-in heart rate monitors that allow users to track their heart rate via handlebars or compatible chest straps for a more accurate reading during workouts.

Another notable aspect of the Horizon Fitness T81 is the array of workout programs it offers. With up to 30 different programs, users can engage in varied workouts that target different fitness goals, from weight loss to endurance training. The programs are designed to challenge users and keep them motivated as they progress in their fitness journey.

Furthermore, the T81 is designed with space-saving features, including a foldable design that allows for easy storage. Its built-in transport wheels make it simple to move around, which is particularly advantageous for those with limited workout space at home.

In terms of connectivity, the Horizon Fitness T81 integrates Bluetooth technology, allowing users to sync their devices for music playback or fitness tracking. This modern touch enhances the workout experience and enables users to stay connected while exercising.

Overall, the Horizon Fitness T81 treadmill combines quality construction, innovative technology, and user-oriented features. With its solid performance capabilities and adaptable functionalities, it remains a top choice for those committed to achieving their fitness goals in the comfort of their own home. Whether you're a beginner or an experienced runner, the T81 is designed to enhance your workout experience.