Horizon Fitness T92 manual S E M B Ly, Unpacking, Tools Included, Parts Included

INTRODUCTION IMPORTANT PRECAUTIONS

ASSEMBLY

A S S E M B LY

IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!

WARNING

During the assembly process of the treadmill there are several areas that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the treadmill could have frame parts that are not tightened and will seem loose and may cause irritating noises. There should be no side-to-side play in the console masts or any forward and back play in the console assembly or handlebars. If there is any play in these areas, the treadmill has not been properly assembled. To prevent damage to the treadmill, the assembly instructions must be reviewed and corrective actions should be taken.

READING RACK

MP3-IN JACK

STORAGE AREA

GRIP PULSE HANDRAILS

HEADPHONE JACK

HANDLEBARS

ON/OFF SWITCH

CIRCUIT BREAKER

POWER CORD

SPEAKERS

STORAGE AREA

CONSOLE MAST COVER

CONSOLE

FAN

SAFETY KEY PLACEMENT

CONSOLE MAST SUPPORT BAR CONSOLE MAST

MOTOR COVER

RUNNING BELT / RUNNING DECK

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

CONDITIONING GUIDELINES

UNPACKING

Place the treadmill carton on a level flat surface. It is recommended that you place a protective covering on your floor. Take CAUTION when handling and transporting this unit. Never open box when it is on its side. Once the banding straps have been removed, do not lift or transport this unit unless it is fully assembled and in the upright folded position, with the lock latch secure. Unpack the unit where it will be used. The enclosed treadmill is equipped with high-pressure shocks and may spring open if mishandled. Never grab hold of any portion of the incline frame and attempt to lift or move the treadmill. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!

Before proceeding, find your treadmill’s serial number and model name located under the deck on the frame crossbar and enter it in the space provided below.

	SIDE RAIL
TRANSPORT WHEEL	ROLLER END CAP
ADJUSTABLE DECK CUSHIONING	REAR ROLLER
	ADJUSTMENT BOLTS

TOOLS INCLUDED

6mm T-wrench

5 mm T-wrench

10 mm L-wrench 4mm L-wrench Screwdriver

PARTS INCLUDED

BEFORE YOU BEGIN

TREADMILL OPERATION

CONDITIONING GUIDELINES

TROUBLESHOOTING & MAINTENANCE

Enter your serial number and model name in the boxes below:

SERIAL NUMBER:

MODEL NAME:

1 Safety Key

1 Console Assembly (located under treadmill deck)

2 Console Mast Covers

1 Power Cord

6 Hardware Bags

2 Handlebars

2 Console Masts

1 Console Mast Support Bar

1 Bottle of Silicone Lubricant

1 Audio Adaptor Cable

TROUBLESHOOTING & MAINTENANCE

LIMITED

WARRANTY



*Refer to the serial number and model name when calling for service.

*Also enter this serial number on your Warranty Card.

If you have questions or if there are any missing parts, contact Customer Tech Support.

Contact information is located on the back panel of this manual.

For a complete exploded diagram, visit us at www.horizonfitness.com



LIMITED WARRANTY

T92_Rev.1.2.indd 6-7 6/10/08 8:40:11 AM