2.Installing the Icemaker
1)Unpack the icemaker, and remove all shipping cartons, tape(s) and packaging.
2)Refer to the charts below and also to the "SET UP" instructions on the icemaker when installing the icemaker.
3)Apply the gasket (included) to the top of the bin and around the perimeter where the icemaker will be installed. Each corner should be mitered and sealed with
4)Use the adjustable legs to level the ice bin in both the
Single Icemaker Unit
|
| 22" WIDE UNIT | 30" WIDE UNIT | 30" WIDE UNIT | 42" WIDE UNIT | 48" WIDE UNIT |
|
|
| (except KML & KMD) | (KML only) |
|
|
| Top Kit | 48" UNIVERSAL | 48" UNIVERSAL | 48" UNIVERSAL | 48" UNIVERSAL | 48" UNIVERSAL |
| Unit | 7" |
| 1" | 3" |
|
|
|
|
| |||
Position |
|
|
|
|
| |
|
|
|
|
| ||
|
|
|
|
|
| |
| Cover | YES | NO | NO | NO | NO |
| ||||||
|
|
|
|
|
| |
| Top Kit | N/A | 60" UNIVERSAL | 60" UNIVERSAL | N/A | 60" UNIVERSAL |
|
|
| * | * |
|
|
| Unit |
|
| 1" |
|
|
N/A |
|
| N/A |
| ||
Position |
|
|
| |||
|
|
|
|
| ||
|
|
|
|
|
| |
| Cover | N/A | YES (QTY 2) | YES (QTY 2) | N/A | YES |
| ||||||
|
|
|
|
|
| |
* One 30" wide unit on a |
Dual Icemaker Units
Two 22" WIDE UNITS Two 30" WIDE UNITS Two 30" WIDE UNITS Two 30" WIDE UNITS
(except KML, KMD (KML only) (KMD only) &
Top Kit | N/A | N/A | N/A | N/A | ||
Unit | N/A | N/A | N/A | N/A | ||
Position | ||||||
|
|
|
| |||
| Cover | N/A | N/A | N/A | N/A | |
| Top Kit | 60" UNIVERSAL | 60" UNIVERSAL | 60" UNIVERSAL | 60" UNIVERSAL | |
| Unit | 4.5" |
| 1" | 3" | |
|
| |||||
Position | 3" |
|
|
| ||
|
|
| ||||
|
|
|
|
| ||
| Cover | YES | YES | YES | YES | |
| ||||||
|
|
|
|
|
10