HotBrick VPN Client User Manual Property of HotBrick — 2005 11
• the preshared key you will use for this tunnel (this preshared key must be the same in the gateway)
• the IP address of your company LAN (e.g. specify 192.168.1.0)
4.2.3 Step 3 of 3
The third step summaries your configuration. Other parameters may be further configured directly via the main
interface (e.g. Certificates, virtual IP address, etc...)
4.3 Tunnel configuration (main window) 4.3.1 How to create a tunnel?
To create a VPN tunnel from the main window (without using configuration wizard), you must follow the follow-
ing steps:
1. Right-click on 'Configuration' in the tree list window and select "New Phase 1”
2. Configure Authentication Phase (Phase 1)
3. Right-click on the new Phase 1 in the tree control and select “Add Phase 2”