the cooker touching hot parts.
! Make sure the supply pressure conforms with the values shown in the table entitled “Caracteristics of the burners and nozzles”.
When the cooker is installed between cabinets (recessed), the gas connection must be effected by an approved flexible hose with bayonet fitting
(BS 669 Current Edition). The gas inlet for the cookers is a threaded G 1/2 gas female fitting .
6
600 mm
HOT PARTS
The cooker should be connected to the gas-supply by a corgi registered installer. During installation of this product it is essential to fit an approved gas tap to isolate the supply from the appliance for the convenience of any subsequent removal or servicing. Connection of the appliance to the gas mains or liquid gas must be carried out according to the prescribed regulation in force, and only after it is ascertained that it is adaptable to the type of gas to be used. If not, follow the instructions indicated in the paragraph headed “Adaptation to different gas types”. On some models the gas supply can be connected on the left or on the right, as necessary; to change the connection, reverse the position of the hose holder with that of the cap and replace the gasket (supplied with the appliance). In the case of
connection to liquid
gas, by tank, use
pressure regulators
that conform to the
regulation in force.
The gas supply must
be connected to the
left of the appliance.
Be sure that the hose does not pass
through the rear of
Gas connection
Fig. C
Fig. B
Installation
Moving the Cooker

GB

Connecting the gas supply

To make the connection, a flexible hose should be used corresponding to the current gas regulations which are:

•the hose must never be at any point in its lenght in contact with the “hot” parts of the cooker;

•the hose must never be longer than 1,5 metre;

•the hose must not be subject to any tension or torsional stress and it must not have any excessively narrow curves or bottlenecks;

•the hose must be easy to inspect along its entire length to check its condition;

•the hose must always be in good condition, never attempt to repair.

!The installation must comply with gas safety (installation and use) regulations 1984. In all cases for the above, by low, a qualified, corgi approved engineer must be called for installation.

Disposing of the appliance

When disposing of the appliance please remove the plug by cutting the mains cable as close as possible to the plug body and dispose of it as described above.

Adapting the cooker to different types of gas

In order to adapt the cooker to a different type of gas with respect to the gas for which it was produced (indicated on the label attached to the lid), follow these steps:

a)replace the hose holder mounted on the appliance with that supplied in the bag of “cooker accessories”.

b )Replacing the burner nozzles on the hob:

•remove the grids and slide the burners from their housings;

•unscrew the nozzles using a 7 mm socket spanner, and replace them with nozzles for the new type of gas (see

table 1 “Burner and nozzle characteristics”).

•replace all the

components by repeating the steps in reverse order.

Page 5 Page 7
Page 6
Image 6
Hotpoint 52TGW Connecting the gas supply, Disposing of the appliance, Adapting the cooker to different types of gas
Page 5 Page 7

52TGW specifications

The Hotpoint 52TGW is a well-regarded gas cooker that combines functionality with stylish design, making it a popular choice for many households. This cooker features a classic white finish that can blend seamlessly into various kitchen aesthetics, providing both practicality and a touch of elegance.

One of the standout features of the Hotpoint 52TGW is its twin oven design, which allows users to cook multiple dishes simultaneously. The main oven has a capacity of 58 liters, providing ample space for larger meals, while the secondary oven offers an additional 31 liters, perfect for side dishes or baking. This versatility is further enhanced by the inclusion of a grill in the top oven, enabling users to achieve different cooking results without the need for multiple appliances.

The Hotpoint 52TGW is equipped with four gas burners on the hob, making it suitable for a range of cooking methods from boiling to simmering. Each burner is designed with precision in mind, featuring different sizes to accommodate various pot and pan sizes. This ensures efficient heat distribution and reduces cooking times, making meal preparation a breeze.

Safety is a crucial consideration in any kitchen appliance, and the Hotpoint 52TGW does not fall short. It includes a flame failure device that automatically cuts off the gas supply if the flame goes out, providing peace of mind for users, especially when cooking at higher temperatures. Additionally, the cooker features an easy-clean enamel interior, which makes maintaining the oven's cleanliness straightforward and hassle-free.

For those who enjoy more advanced cooking techniques, the Hotpoint 52TGW offers a range of cooking functions, including fan cooking, conventional grilling, and defrosting, catering to various culinary needs. The user-friendly control knobs are designed for easy operation, while the clear oven door allows for monitoring food without opening the oven and losing heat.

In summary, the Hotpoint 52TGW is a versatile and stylish gas cooker that combines ample cooking space, safety features, and multiple cooking options. With its well-thought-out design and focus on efficiency, it is an excellent choice for home cooks looking to elevate their culinary experience while enjoying everyday convenience. Whether preparing a family meal or experimenting with new recipes, the Hotpoint 52TGW stands out as a reliable kitchen companion.
Top Page Image Contents