Hotpoint 6kg Ultima Contents

Contents

Description,2

Wash Labels Explained,4

Installation,5-8

Unpacking

Remove the transit fixings

Location

Levelling

Water connection

Drainage connection

Electrical connection

Before you start using your machine

Control Panel Features, 9

Programmes and Option Modifiers, 10-16

Starting a wash and dry programme

Drying

Programme table

Special features

Option modifiers

Detergents and Laundry,17

Detergent dispenser

Care and Maintenance,18

Cleaning your machine

Fuses

Changing the plug

Precautions and Advice,19-20

General safety

Saving energy and respecting the environment

Disposal

Safety advice

Technical details chart

Something Wrong? - Troubleshooting,21-23

Service,24

Before calling for assistance

Spare parts

Key Contacts

WASHER DRYER

!Keep this instruction book on hand in order to refer to it when necessary. Take it with you when you move,

and should you sell this appliance or pass it on to another party,make sure that this booklet is supplied

along with the appliance so that the new owner may be informed about warnings and suggestions on how

the machine works.

3

Description Contents

Programmes

and Option

Modifiers

Control Panel

FeaturesInstallation

Wash Labels

Explained Detergents

and Laundry Care and

Maintenance Precautions

and Advice

Something

Wrong -

Troubleshooting Service

GB

Contents

Main Description see page 6 see page 7 Contents Description,2 Wash Labels Explained,4 Installation,5-8 Control Panel Features, 9 Programmes and Option Modifiers, 10-16 Detergents and Laundry,17 Care and Maintenance,18 Wash Labels Explained Unpacking Remove the transit fixings 1. Unscrew the bolt using a 13mm spanner. 2. STOP when 3 threads can be seen. 3. Hold, slide sideways and pull to remove. 4. For safety, insert one of the the plastic covers (supplied with your machine) over the hole. Water Connection Benefits of cold fill Levelling Drainage Connection Electrical connections Before you start using your machine Control Panel Features Ultima Ultima control panel features Starting a Programme Starting a typical wash and dry programme Drying Setting drying programmes Drying options Drying table Important information will show in Display will show in Display Drycare tips Programme Table Programme Table Installation 13 = 6kg = 6kg Did you know? Option modifiers continued... Automatic features Note: Energy saving and water levels GB Option modifiers Detergent dispenser Detergents and Laundry Did you know that with Hotpoint and Ariel youll get the best washing results? Washcare Tips Care and maintenance Cleaning Changing the plug Moulded plug Precautions and advice General safety Saving energy and respecting the environment Recycling and Disposal information Disposal of old electrical appliances Precautions and advice Safety advice Technical Details Chart Installation Programmes and Option Modifiers Section 1: All Ultima Models - General Troubleshooting Problem: Possible causes / Solution: Installation 21 Programmes and Option Modifiers Installation Technical Details Chart Section 3: Specific Error Messages on the LCD Display Section 2: All Ultima Models - Problems with the Drying cycle? To prevent damage to your laundry, the machine default is LOW heat Error message: Technical Details Chart Service Key Contacts After Sales Service Repair Service and Information Help Desk Extended Warranties