Programmes and
Option Modifiers
Automatic features
Unbalanced load detection
The machine has an inbuilt feature to prevent it from spinning too fast with an unbalanced load.
When an unbalanced load is detected, the machine will attempt to redistribute the load in order to balance it evenly to achieve full spin speed.
If this is not possible and an unbalanced load remains the spin speed will be reduced, depending on the amount of unbalance detected. This is to prevent the machine from damaging itself or its surroundings and to prevent excessive noise from the machine.
If the spin result is unsatisfactory following a reduced spin speed attempt to rectify the unbalanced load, then on completion of the programme the load can be redistributed evenly in the drum by hand. Select a spin cycle.
Note: Do not attempt to spin heavy or absorbent single items as the machine cannot distribute these evenly.
If you need to wash a single item you will need to add some other items as ballast to allow the machine to distribute the load evenly throughout the drum.
No water detection
The machine will automatically detect if it cannot take in water and will notify you by flashing the Prewash light.
If this occurs please check the appliance is plumbed in correctly (see Installation Guide) and the water supply is turned on as described in the installation guide that accompanies this booklet.
GB
Explained | Wash Labels | |
|
| |
Contents |
| |
|
| |
Description |
| |
|
| |
Option Modifiers | Programmes and | |
|
| |
Troubleshooting |
| |
|
| |
Advice | Safety | |
|
| |
Details | Technical | |
|
| |
Service |
|
11
