Hotpoint Aquarius+ manual Troubleshooting

Models: Aquarius+ Aquarius

1 16
Download 16 pages 11.82 Kb
Page 13
Image 13

Troubleshooting

Problem:

The display states “door”

The display shows F000

The programme takes a long time.

Steam is coming from the dispenser drawer

There is too much foam?

The detergent dispenser will not close properly or is collecting water?

Not all the detergent has been flushed away?

Possible causes / Solution:

The door is not fully closed, please close fully to start cycle.

Where 000 is the number (please contact Hotpoint Service and quote the number).

Check for low water pressure.

Programme times listed in the Programme Table are approximate. Options selected can affect the programme times (see Programmes and Option Modifiers).

This is not a fault, we have designed the machine to release steam from the dispenser drawer during hot washes.

The detergent is not suitable for machine washing:

If you have used the wrong type of detergent, select a Rinse programme to flush out your machine.

You used too much detergent (see Detergent and Laundry): Refer to the manufacturer’s recommendations.

Check the drawer is properly aligned.

Clean the dispenser drawer (see Care and Maintenance).

Check the cold water supply tap is turned on fully.

Check the water inlet hoses are not kinked.

The water pressure is insufficient.

GB

Explained

Wash Labels

 

 

Contents

 

 

 

Description

 

 

 

Option Modifiers

Programmes and

 

 

Troubleshooting

 

 

 

Advice

Safety

 

 

Details

Technical

 

 

Service

 

13

Page 13
Image 13
Hotpoint Aquarius+ manual Troubleshooting