Operating Faults (Cooking plate sensors)
I switch the hob on and it switches off
❏You are taking more than 10 seconds to choose the cooking zone you wish to use. Make your choice more quickly.
Hob emits a long bleep ❏ You have touched a selection symbol for too long (*)
❏There is a receptacle or damp cloth on the control area.
Remove it.
❏Some liquid has spilled onto the control area, or it is damp. Dry it
❏You are cleaning the hob and the control area is damp
(*).
❏Someone is leaning on the control area.
(*)A safety system is activated after about 10 seconds.
I want to use a particular function, but can’t
❏This hob is equipped with the latest technology to ensure the complete safety of its components and of the user, so the sequence of operations is very important.
Read the instruction manual again, particularly the part dealing with the function you wish to use.
The control zone is slightly warm, even though the hob is not in use
❏ This is normal. The hob is not malfunctioning.
The symbols 
... appear ❏ Call the Technical Assistance Service.
The cooking plate turns itself off in the middle of the cooking process and "F" and "8" flash intermittently on the control area display
❏The plate has been on at high power for a long period of time. Touch the area marked "+" again and continue cooking.
The heating power level displayed goes down or completely out in the middle of the cooking process and "F" and "2" flash intermittently on the control area display
❏The plate has been on at high power for a long period of time and the control area has overheated.
❏Wait a few minutes and then touch the power controls to set a lower heating power, or use a different cooking plate.
15
