Connecting the drain hose

•the supply voltage is included within the values

65 - 100 cm

Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;

indicated on the Technical details table

GB

 

(see page 5);

 

•the socket is compatible with the washing machine's plug. If this is not the case, replace the socket or the plug.

Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below.

Where it connects to the waste water pipe cut end off spigot or remove the blanking cap

The drain hose may be connected to an under- sink trap. Before connecting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.

If it is place over the edge of a basin or sink be sure the free end of the hose should not be underwater.

WARNING - THIS APPLIANCE MUST BE EARTHED. THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and you should wish to re-route the mains cable through partitions, units etc., please ensure that either:

!We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length.

Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms (6 inches). If the hose is pushed down too far, this may cause the machine to self - syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

•the socket is earthed and in compliance with the applicable law;

•the socket is able to sustain the appliance's maximum power load indicated in the Technical details table (see page 5);

the plug is replaced by a fused 13 ampere re- wearable plug bearing the BSI mark of approval. or:

the mains cable is wired directly into a 13 amp cable outlet, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket.

Instructions for connecting cable to an alternative plug:

Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow Earth

B l u e

Neutral

B r o w n

L i v e

!

Page 2 Page 4
Page 3
Image 3
Hotpoint BHWD149 manual 65 100 cm
Page 2 Page 4

BHWD149 specifications

The Hotpoint BHWD149 is a highly efficient washer dryer, designed to meet the needs of modern families seeking performance and versatility in their laundry routine. This appliance combines the functionality of a washing machine and a dryer in one compact unit, making it an excellent choice for those with limited space.

One of the standout features of the BHWD149 is its impressive washing capacity. With a load capacity of 9 kg for washing and 6 kg for drying, this model accommodates larger loads, allowing users to tackle more laundry in a single session. This is particularly beneficial for busy households where time-saving is a priority.

In terms of washing performance, the BHWD149 boasts a range of washing programs tailored to different fabric types and laundry requirements. From delicate items to heavily soiled work clothes, users can easily select the appropriate cycle, ensuring their clothes receive the optimal care. Additionally, the appliance includes a rapid wash option, which can clean lightly soiled clothes in just 30 minutes, perfect for those last-minute laundry needs.

Energy efficiency is another critical characteristic of the Hotpoint BHWD149. It is designed to minimize electricity usage while delivering exceptional cleaning results. The machine has an energy rating of A, making it a responsible choice for environmentally conscious consumers. This efficiency not only reduces the household's carbon footprint but also translates to lower utility bills over time.

The BHWD149 features advanced technologies such as the 'Anti-Allergy' cycle, which is ideal for households with allergy sufferers. This option uses higher temperatures and additional rinses to remove allergens and dirt effectively, ensuring that laundry is not only clean but safe for sensitive skin.

Another notable technology is the 'Direct Injection' feature, which pre-mixes the detergent with water before it enters the drum. This results in a more effective wash, as the detergent penetrates fabrics better and cleans more efficiently, even at lower temperatures.

To enhance user convenience, the Hotpoint BHWD149 comes equipped with a digital display, allowing users to monitor and adjust settings with ease. The machine is also designed with a delay start option, enabling users to set the washing cycle to begin at their convenience, making it easier to manage busy schedules.

In summary, the Hotpoint BHWD149 is a robust washer dryer that offers a combination of efficiency, advanced features, and user-friendly functionality. With its substantial load capacity, energy-saving technologies, and tailored wash options, it stands out as a reliable appliance for any household looking to streamline their laundry tasks. Whether managing a busy family schedule or simply seeking an efficient laundry solution, the BHWD149 is an outstanding choice.
Top Page Image Contents